Analysis and Research on Control Technology of Large Mining Height Fully Mechanized Face and Roadway Surrounding Rock

Kaiyi Xue, Liu Yang

Article ID: 253
Vol 1, Issue 1, 2018

VIEWS - 1251 (Abstract) 277 (PDF)

Abstract


Coal is important basic energy and important raw materials, the development of coal industry to support the rapid development of the national economy. In the 1950s and 1960s, the proportion of coal in China's primary energy production and consumption structure accounted for 90% and 80% respectively, and the proportion of coal in 2004 was 75.6% and 67.7% respectively. In recent years, with the rapid development of fully mechanized mining equipment manufacturing technology, fully mechanized mining equipment to heavy, strong and automated, so that the reliability of the equipment is guaranteed, a strong impetus to the development of large mining technology, new round of coal mining technology revolution, the current in the East, Jincheng and other mining areas have been the first in the thick coal seam f = 1.5-5 use of large mining height fully mechanized mining equipment, to achieve the highest efficiency, the lowest cost of tons of coal. The main points of this paper are: in the production of coal enterprises to improve the competitiveness of the coal market. Conditions and conditions of coal storage conditions should be allowed to give priority to the use of large mining and mining methods.


Full Text:

PDF


References


1. RL. Zhang, GW. He 'Mining Engineering Design Manual' Coal Industry Press, May 2003

2. Ministry of Coal Industry. Coal Mine Design Code. Beijing: China Design Press. 1999

3. YX. Xu. Coal mining. Xuzhou: China University of Mining Press .2001

4. ZX. Wu. Coal Mine Mining Design Handbook. Beijing: Coal Industry Press .2003




DOI: https://doi.org/10.24294/jgc.v1i1.253

Refbacks

  • There are currently no refbacks.




Creative Commons License

This site is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.