Dynamic Crack Toughness of Austempering Steel

Tatyana Avdjieva

Article ID: 650
Vol 2, Issue 1, 2019

VIEWS - 591 (Abstract) 145 (PDF)

Abstract


This work is a part of research on the microstructure and mechanical properties of Cr-Ni-Si steels after various thermal treatments [1, 2]. The need to minimize damage and losses caused by emerging failures in complex engineering facilities such as nuclear, thermal and hydroelectric power stations, and gas and oil pipelines necessitates the creation of materials of high strength, plasticity, welding and high rigidity.


Keywords


Dynamic crack resistance; Austempering; Steel; Microstructure

Full Text:

PDF


References


1. Avdjieva T.(2016). Microstructure features of Cr-Ni steel after isothermal tempering,Annual of Sofia University. Vol. 109.

2. Avdjieva Tet al.(2013). Microstructure and crack resistance of low carbon Cr-Ni and Cr-Ni-W steel after austempering,Central European Journal of Engineering. 3(3). 484-491.

3. Georgiev Met al.(2011). The relation Between Dynamic Crack Strenght of structural Steels and Schnook Loading Fracture Structures, Material science.12. 118-128.

4. Георгиев Мet al.(2012). Оценка работы разрушения ударных образцов с боковыми надрезами, Заводская лаборатория. № 9. 56-61.

5. Litovchenko, Iet al.(2016). The Features of Microstructure and Mechanical Properties of Metastable Austenitic Steel Subjected to Low-temperature and Subsequent Warm Deformation, Russian Physics Journal. Vol. 59, No. 6.

6. Hui Fan Langet al.(2013). Microstructure and Mechanical Properties of a Low CarbonBainitic Steel,Mat. Res. Vol. 84. Issue 4,p. 352–361.

7. Yong Tianaet al.(2017). The Analysis of the Microstructure and Mechanical Properties of Low Carbon Micro alloyed Steels after Ultra-Fast Cooling, Mat. Res. vol.20 no.3.

8. Zuo X, et al. (2015). Study of Pipeline Steels with Acicular Ferrite Microstructure and Ferrite-bainite Dual-phase Microstructure,Materials Research, 18(1).36-41.

9. Pedrosa IRV, et al.(2013). Study of phase transformations in API 5L X80 Steel in order to increase its fracture toughness,Materials Research.16(2).489-496.

10. Sung HK, et al.S (2013). Effects of Cooling Conditions on Microstructure, Tensile Properties, and Charpy Impact Toughness of Low-Carbon High-Strength Bainitic Steels,Metallurgical and Materials Transactions A.44(1):294-302.

11. Gallego J, et al.(2014). Second phase precipitation in ultrafine-grained ferrite steel. Materials Research.




DOI: https://doi.org/10.24294/can.v2i1.650

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

This site is licensed under a Creative Commons Attribution 4.0 International License.