The present study deliberates the recovery of sodium fluoride (NaF)-natrite (Na₂CO₃)-sodium chloride (NaCl) ternary fluxing agent from hazardous aluminum dross waste using three types of heating methods, including direct heating on a hotplate, heating by a drying oven, and microwave heating. Deionized water was used as a green solvent for the recovery experiments. Investigating the effects of time and temperature on recovery percentage showed that a recovery percentage of around 96.5% can be achieved under time and temperature of 90 min and 95 ℃, respectively. The recovered fluxing agent salt was characterized by XRD, FTIR spectroscopy, FESEM, and energy dispersive X-ray spectroscopy (EDS) elemental analysis. Rietveld fitting analysis of phases detected in the XRD patterns showed that the recovered fluxing agent contained 74–81 wt.% NaF, 8–11 wt.% NaCl, and 11–14.7 wt.% Na₂CO₃. The FESEM micrographs revealed that the retrieved salts were in nano scale. The recovered fluxing agent showed different morphologies including needle-like, round shape, and a mixture of both, corresponding to microwave, drying oven, and hotplate heating methods, respectively. The nano-needles exhibited diameter of the tip and base in the range of 39–60 nm and 50–103 nm, respectively.

waste; sodium fluoride; needle-like; microwave-assisted; nanostructure

Xiao Y, Reuter MA, Boin UDO. Aluminium Recycling and Environmental Issues of Salt Slag Treatment. Journal of Environmental Science and Health, Part A. 2005; 40(10): 1861-1875. doi: 10.1080/10934520500183824 Tsakiridis PE, Oustadakis P, Agatzini-Leonardou S. Aluminium recovery during black dross hydrothermal treatment. Journal of Environmental Chemical Engineering. 2013; 1(1-2): 23-32. doi: 10.1016/j.jece.2013.03.004 Dash B, Das BR, Tripathy BC, et al. Acid dissolution of alumina from waste aluminium dross. Hydrometallurgy. 2008; 92(1-2): 48-53. doi: 10.1016/j.hydromet.2008.01.006 Sarker MdSR, Alam MdZ, Qadir MdR, et al. Extraction and characterization of alumina nanopowders from aluminum dross by acid dissolution process. International Journal of Minerals, Metallurgy, and Materials. 2015; 22(4): 429-436. doi: 10.1007/s12613-015-1090-2 Unlü N, Drouet MG. Comparison of salt-free aluminum dross treatment processes. Resour Conserv Recycl. 2002; 36. doi: 10.1016/S0921-3449(02)00010-1 Yoshimura HN, Abreu AP, Molisani AL, et al. Evaluation of aluminum dross waste as raw material for refractories. Ceramics International. 2008; 34(3): 581-591. doi: 10.1016/j.ceramint.2006.12.007 Narayanan R, Sahai Y. Chemical Interactions of Dross with Water and Water Vapor in Aluminum Scrap Remelting. Materials Transactions, JIM. 1997; 38(1): 85-88. doi: 10.2320/matertrans1989.38.85 Das BR, Dash B, Tripathy BC, et al. Production of η-alumina from waste aluminium dross. Minerals Engineering. 2007; 20(3): 252-258. doi: 10.1016/j.mineng.2006.09.002 Shinzato MC, Hypolito R. Solid waste from aluminum recycling process: characterization and reuse of its economically valuable constituents. Waste Management. 2005; 25(1): 37-46. doi: 10.1016/j.wasman.2004.08.005 Harrison PTC. Fluoride in water: A UK perspective. Journal of Fluorine Chemistry. 2005; 126(11-12): 1448-1456. doi: 10.1016/j.jfluchem.2005.09.009 World Health Organization. Sodium in drinking-water, background document for development of WHO guidelines for drinking-water quality, 2nd ed. World Health Organization; 1996. Bruckard WJ, Woodcock JT. Recovery of valuable materials from aluminium salt cakes. International Journal of Mineral Processing. 2009; 93(1): 1-5. doi: 10.1016/j.minpro.2009.05.002 Afzal S, Rahimi A, Ehsani MR, et al. Experimental study of hydrogen fluoride adsorption on sodium fluoride. Journal of Industrial and Engineering Chemistry. 2010; 16(1): 147-151. doi: 10.1016/j.jiec.2010.01.004 Fryxell GE, Cao G. Environmental Applications of Nanomaterials. Imperial College Press; 2011. doi: 10.1142/p814 Lailach G, Bulan A, Buss G. Process for the preparation of sodium fluoride. US6251358B1, 1998. Abdelkader E, Buckner SW. Synthesis of NaX (X = F, Cl, Br, I) Nanoparticles. Soft Nanoscience Letters. 2013; 3(1): 22-27. doi: 10.4236/snl.2013.31005 Kupka N, Rudolph M. Role of sodium carbonate in scheelite flotation—A multi-faceted reagent. Minerals Engineering. 2018; 129: 120-128. doi: 10.1016/j.mineng.2018.09.005 Kientzler P, Löbbers K, Michard L. Improved modifying flux for molten aluminium. EP2231887A1, 2013. Dang H, Chang Z, Wu X, et al. Na2SO4–NaCl binary eutectic salt roasting to enhance extraction of lithium from pyrometallurgical slag of spent lithium-ion batteries. Chinese Journal of Chemical Engineering. 2022; 41: 294-300. doi: 10.1016/j.cjche.2021.09.008 Huang J, Wang Y, Zhou G, et al. Investigation on the Effect of Roasting and Leaching Parameters on Recovery of Gallium from Solid Waste Coal Fly Ash. Metals. 2019; 9(12): 1251. doi: 10.3390/met9121251 Wu H, Yan H, Liang Y, et al. Rare earth recovery from fluoride molten-salt electrolytic slag by sodium carbonate roasting-hydrochloric acid leaching. Journal of Rare Earths. 2023; 41(8): 1242-1249. doi: 10.1016/j.jre.2022.07.001 Anastas PT, Warner JC. Green Chemistry: Theory and Practice. Oxford University Press; 1998. Mahinroosta M, Allahverdi A. A promising green process for synthesis of high purity activated-alumina nanopowder from secondary aluminum dross. Journal of Cleaner Production. 2018; 179: 93-102. doi: 10.1016/j.jclepro.2018.01.079 Mahinroosta M, Allahverdi A. Enhanced alumina recovery from secondary aluminum dross for high purity nanostructured γ-alumina powder production: Kinetic study. Journal of Environmental Management. 2018; 212: 278-291. doi: 10.1016/j.jenvman.2018.02.009 Bowen P, Highfield JG, Mocellin A, et al. Degradation of Aluminum Nitride Powder in an Aqueous Environmet. Journal of the American Ceramic Society. 1990; 73(3): 724-728. doi: 10.1111/j.1151-2916.1990.tb06579.x Fukumoto S, Hookabe T, Tsubakino H. Hydrolysis behavior of aluminum nitride in various solutions. J Mater Sci. 2000; 35. doi: 10.1023/A:1004718329003 Reynolds JG, Belsher JD. A Review of Sodium Fluoride Solubility in Water. Journal of Chemical & Engineering Data. 2017; 62(6): 1743-1748. doi: 10.1021/acs.jced.7b00089 Wang B, Zhang W, Zhang W, et al. Progress in Drying Technology for Nanomaterials. Drying Technology. 2005; 23(1-2): 7-32. doi: 10.1081/drt-200047900 Sarig S, Eidelman N, Glasner A, et al. The effect of supersaturation on the crystal characteristics of potassium chloride. Journal of Chemical Technology and Biotechnology. 1978; 28(10): 663-667. doi: 10.1002/jctb.5700281004 Balasubramanian C, Bellucci S, Cinque G, et al. Characterization of aluminium nitride nanostructures by XANES and FTIR spectroscopies with synchrotron radiation. Journal of Physics: Condensed Matter. 2006; 18(33): S2095-S2104. doi: 10.1088/0953-8984/18/33/s25 Roy Chowdhuri A, Takoudis CG, Klie RF, et al. Metalorganic chemical vapor deposition of aluminum oxide on Si: Evidence of interface SiO2 formation. Applied Physics Letters. 2002; 80(22): 4241-4243. doi: 10.1063/1.1483903 Bryukvina LI, Khulugurov VM, Parfianovich IA. Infrared vibrational spectra of radiatively induced absorption of NaF: OH crystals. Opt Spectrosc. 1987; 63(1). Cheng J, Guo R, Wang QM. Zinc oxide single-crystal microtubes. Applied Physics Letters. 2004; 85(22): 5140-5142. doi: 10.1063/1.1825067 Cheng J, Agrawal D, Zhang Y, et al. Fabricating transparent ceramics by microwave sintering. Am Ceram Soc Bull. 2000; 79(9). Liu XY, Bennema P. Theoretical consideration of the growth morphology of crystals. Physical Review B. 1996; 53(5): 2314-2325. doi: 10.1103/physrevb.53.2314 Ma M, Ye W, Wang XX. Effect of supersaturation on the morphology of hydroxyapatite crystals deposited by electrochemical deposition on titanium. Materials Letters. 2008; 62(23): 3875-3877. doi: 10.1016/j.matlet.2008.05.009