In response to the challenges of climate change, this study explores the use of moringa pod powder as reinforcement in the manufacture of compressed earth bricks to promote sustainable building materials. The objective is to evaluate the impact of African locust bean pod powder on the mechanical properties of the bricks. Two types of soils from Togo were characterized according to geotechnical standards. Mixtures containing 8% African locust bean pod powder at various particle sizes (0.08 mm, 2 mm, and between 2 and 5 mm) were formulated and tested for compression and tensile strength. The results show that the addition of African locust bean pod reduces the mechanical strength of the bricks compared to the control sample without pods, with strengths ranging from 0.697 to 0.767 MPa, compared to 0.967 to 1.060 MPa for the control. However, the best performances for the mixtures were obtained with a fineness of less than 2 mm. This decrease in performance is attributed to several factors, including inadequate water content and suboptimal preparation and compaction methods. Optimizing formulation parameters is necessary to maximize the effectiveness of African locust bean pods. This work highlights the valorization of agro-industrial waste, paving the way for a better understanding of bio-based materials and future research for sustainable construction.

AFNOR EDITIONS. (1993, mars). NF P 94-051. https://www.boutique.afnor.org/Store/Preview/DisplayExtract?ProductID=11080&VersionID=6

Aguwa, J. I., Alhaji, B., Jiya, A., Kareem, D. H. (2016). Effectiveness of locust bean pod solution (LBPS) in the production of sandcrete blocks for buildings. Nigerian Journal of Technological Development, 13(1), Article 1. https://doi.org/10.4314/njtd.v13i1.3

Ahodegnon, D. K., Gnansounou, M., Bogninou, R. G. S., et al. (2018). Biochemical profile and antioxidant activity of Parkia biglobosa and Tamarindus indica fruits acclimated in Benin. International journal of advanced research, 6(11), 702‑711. https://doi.org/10.21474/IJAR01/8050

Awal, A. S. M. A., Mariyana, A. A. K., Hossain, M. Z. (2021). Some Aspects of Physical and Mechanical Properties of Sawdust Concrete. GEOMATE Journal, 10(21), Article 21.

Ayite, Y., Kodjo, K. M., Bedja, K. (2011). Determinatin dúne application des betons de balles de riz dans le batiment au Togo. Journal de La Recherche Scientifique de l’Université de Lomé, 13(2), Article 2.

Aykut, S. C., Maertens, L. (2021). The climatization of global politics: Introduction to the special issue. International Politics, 58(4), 501‑518. https://doi.org/10.1057/s41311-021-00325-0

Azokpota, P., Hounhouigan, D. J., Nago, M. C. (2006). Modifications microbiologiques et chimiques au cours de la fermentation du caroube africain (Parkia biglobosa) pour produire de l’afitin , de l’iru et du sonru , trois condiments traditionnels produits au Bénin. International Journal of Food Microbiology, 107(3), 304‑309. https://doi.org/10.1016/j.ijfoodmicro.2005.10.026

Balogun, W. G., Adebayo, I. A., Yusuf, U., Seeni, A. (2018). A review of the phytochemistry and medicinal activities of the popular African food additive: Parkia biglobosa seed. Oriental Pharmacy and Experimental Medicine, 18(4), 271‑279. https://doi.org/10.1007/s13596-018-0337-7

Banakinao, S. (2016). Caractérisation et modélisation du comportement mécanique des microstructures hétérogènes : Cas du matériau composite (terre-cosse de néré) et ses applications dans les BTP (Bâtiments et Travaux Publics). Université de Lomé.

Banakinao, S., Tiem, S., Attipou, K., et al. (2017). Use of the Nere Pod (Parkia Biglobosa) for the Improvement of Mechanical Properties of Soils. American Journal of Applied Sciences, 14(2), 302‑308. https://doi.org/10.3844/ajassp.2017.302.308

Banakinao, S., Tiem, S., Lolo, K., et al. (2016). Dataset of the use of tannin of néré (parkia-biglobosa) as a solution for the sustainability of the soil constructions in West Africa. Data in Brief, 8, 474‑483. https://doi.org/10.1016/j.dib.2016.05.072

Batool, F., Islam, K., Cakiroglu, C., Shahriar, A. (2021). Effectiveness of wood waste sawdust to produce medium- to low-strength concrete materials. Journal of Building Engineering, 44, 103237. https://doi.org/10.1016/j.jobe.2021.103237

Bazus, A., Rigal, L., Université Paul Sabatier. (1991). Raffinage des agroressources : Extraction et caractérisations des glucuronoxylanes des coques de tournesol.

Benyahia, A., Merrouche, A., Rokbi, M., Kouadri, Z. (2013). Étude de l’effet du traitement alcalin des fibres végétales sur le comportement mécanique du composite Polyester insaturée-Fibre Alfa. In A. F. de Mécanique (Éd.), CFM 2013—21ème Congrès Français de Mécanique. AFM, Maison de la Mécanique, 39/41 rue Louis Blanc - 92400 Courbevoie. https://hal.science/hal-03439860

Bledzki, A. K., Gassan, J. (1999). Composites reinforced with cellulose based fibres. Progress in Polymer Science, 24(2), 221‑274. https://doi.org/10.1016/S0079-6700(98)00018-5

Bonifacio, A. L., Archbold, P. (2024). Impact of Oat Husk Extracts on Mid-Stage Cement Hydration and the Mechanical Strength of Mortar. Construction Materials, 4(1), Article 1. https://doi.org/10.3390/constrmater4010006

Bothon, F. T. D., Atindéhou, M. M., Koudoro, Y. A., et al. (2023). Parkia biglobosa Fruit Husks: Phytochemistry, Antibacterial, and Free Radical Scavenging Activities. American Journal of Plant Sciences, 14(2), Article 2. https://doi.org/10.4236/ajps.2023.142012

Camargo, M. M., Adefrs Taye, E., Roether, J. A., et al. (2020). A Review on Natural Fiber-Reinforced Geopolymer and Cement-Based Composites. Materials, 13(20), Article 20. https://doi.org/10.3390/ma13204603

Cavalieri, F., Bellotti, D., Caruso, M., Nascimbene, R. (2023). Comparative evaluation of seismic performance and environmental impact of traditional and dissipation-based retrofitting solutions for precast structures. Journal of Building Engineering, 79, 107918. https://doi.org/10.1016/j.jobe.2023.107918

Cavalliere, C., Habert, G., Dell’Osso, G. R., Hollberg, A. (2019). Continuous BIM-based assessment of embodied environmental impacts throughout the design process. Journal of Cleaner Production, 211, 941‑952. https://doi.org/10.1016/j.jclepro.2018.11.247

Chamasemani, N. F., Kelishadi, M., Mostafaei, H., et al. (2024). Environmental Impacts of Reinforced Concrete Buildings : Comparing Common and Sustainable Materials: A Case Study. Construction Materials, 4(1), Article 1. https://doi.org/10.3390/constrmater4010001

Chong, X., Hou, L., Xie, L., Yang, C. (2021). Seismic performance of a new energy dissipative cladding panel connection system for application in precast concrete frame structure. Journal of Building Engineering, 44, 102671. https://doi.org/10.1016/j.jobe.2021.102671

Compaoré, C. S., Tapsoba, F. W., Parkouda, C., et al. (2020). Development of starter cultures carrier for the production of high quality soumbala, a food condiment based on Parkia biglobosa seeds. African Journal of Biotechnology, 19(11), 820‑828. https://doi.org/10.5897/AJB2020.17244

Dejeant, F., Garnier, P., Joffroy, T. (2021). Matériaux locaux, matériaux d’avenir. CRAterre. https://hal.science/hal-03293589

Divsalar, R. (2011). Building problems in hot climate: Energy efficient building design. LAP LAMBERT Acad. Publ.

Dollente, I. J. R., Valerio, D. N. R., Quiatchon, P. R. J., et al. (2023). Enhancing the Mechanical Properties of Historical Masonry Using Fiber-Reinforced Geopolymers. Polymers, 15(4), Article 4. https://doi.org/10.3390/polym15041017

Drovou, S., Kassegne, K. A., Sanda, K. (2015). Élaboration et caractérisation mécanique et physique des panneaux de particules de sciure de kapokier avec la poudre tanifère de la cosse de gousse de néré. European Scientific Journal, ESJ, 11(6), Article 6. https://eujournal.org/index.php/esj/article/view/5124

Ebekozien, A., Ahmed, M. A. H., Aigbavboa, C., et al. (2024). Appraising the impact of climate change on construction activities : Are the Nigerian practitioners prepared? Journal of Infrastructure, Policy and Development, 8(6), Article 6. https://doi.org/10.24294/jipd.v8i6.3861

Elfaleh, I., Abbassi, F., Habibi, M., et al. (2023). A comprehensive review of natural fibers and their composites: An eco-friendly alternative to conventional materials. Results in Engineering, 19, 101271. https://doi.org/10.1016/j.rineng.2023.101271

Environment, U. N. (2010, octobre 16). Rapport annuel 2009 du PNUE | PNUE - Programme des Nations Unies pour l’environnement. https://www.unep.org/resources/annual-report/unep-2009-annual-report

Gan, V. J. L., Deng, M., Tse, K. T., et al. (2018). Holistic BIM framework for sustainable low carbon design of high-rise buildings. Journal of Cleaner Production, 195, 1091‑1104. https://doi.org/10.1016/j.jclepro.2018.05.272

Guo, A., Sun, Z., Feng, H., et al. (2023). State-of-the-art review on the use of lignocellulosic biomass in cementitious materials. Sustainable Structures, 3(1). https://doi.org/10.54113/j.sust.2023.000023

Horowitz, C. A. (2016). Paris Agreement. International Legal Materials, 55(4), 740‑755. https://doi.org/10.1017/S0020782900004253

Jiang, D., Jiang, D., Lv, S., et al. (2021). Effect of modified wheat straw fiber on properties of fiber cement-based composites at high temperatures. Journal of Materials Research and Technology, 14, 2039‑2060. https://doi.org/10.1016/j.jmrt.2021.07.105

Keita, I., Sorgho, B., Dembele, C., et al. (2014). Ageing of clay and clay–tannin geomaterials for building. Construction and Building Materials, 61, 114‑119. https://doi.org/10.1016/j.conbuildmat.2014.03.005

Khiratkar, B., Khade, S., Tripathi, A. (2022). Biogas: Renewable Natural Gas (p. 119‑128). https://doi.org/10.4018/978-1-6684-5269-1.ch007

Koh, C. H. (Alex), Kraniotis, D. (2020). A review of material properties and performance of straw bale as building material. Construction and Building Materials, 259, 120385. https://doi.org/10.1016/j.conbuildmat.2020.120385

Konečný, P., Teslík, J., Hamala, M. (2013). Mechanical and Physical Properties of Straw Bales. Advanced Materials Research, 649, 250‑253. https://doi.org/10.4028/www.scientific.net/AMR.649.250

Kouto, Y. A. (2024). Formulation et caractérisation de béton de terre incorporant des fibres de tiges de maïs. Ecole polytechnique de Lomé-UL.

Lecompte, T. (2024). Matériaux bio-sourcés pour le bâtiment et stockage temporaire de carbone. La construction responsable. https://doi.org/10.51257/a-v2-c8124

Liu, Z., Han, C., Li, Q., et al. (2022). Study on wood chips modification and its application in wood-cement composites. Case Studies in Construction Materials, 17, e01350. https://doi.org/10.1016/j.cscm.2022.e01350

Maglad, A. M., Othuman Mydin, M. A., Dip Datta, S., Tayeh, B. A. (2023). Assessing the mechanical, durability, thermal and microstructural properties of sea shell ash based lightweight foamed concrete. Construction and Building Materials, 402, 133018. https://doi.org/10.1016/j.conbuildmat.2023.133018

Mahdy, M. M., Mahfouz, S. Y., Tawfic, A. F., Ali, M. A. E. M. (2023). Performance of Rice Straw Fibers on Hardened Concrete Properties under Effect of Impact Load and Gamma Radiation. Fibers, 11(5), Article 5. https://doi.org/10.3390/fib11050042

Majeed, S. S. (2024). Formulating Eco-Friendly Foamed Mortar by Incorporating Sawdust Ash as a Partial Cement Replacement. Sustainability, 16(7), Article 7. https://doi.org/10.3390/su16072612

Mastali, M., Dalvand, A. (2016). Use of silica fume and recycled steel fibers in self-compacting concrete (SCC). Construction and Building Materials, 125, 196‑209. https://doi.org/10.1016/j.conbuildmat.2016.08.046

McCabe, J. (2018, avril 29). La résistivité thermique des bottes de paille pour la construction Joseph C. McCabe | ESBA. European Straw Building Association. https://strawbuilding.eu/the-thermal-resistivity-of-straw-bales-for-construction-joseph-c-mccabe/

Nenonene, A. Y., Koba, K., Sanda, K., Rigal, L. (2014). Composition chimique et propriétés adhésives d’extraits d’organes tannifères de quelques plantes du Togo pour l’agglomeration de particules de tige de kénaf (Hibiscus cannabinus L.). 037, 49‑55.

NF P94-093 (Afnor editions). (2014). https://www.boutique.afnor.org/fr-fr/norme/nf-p94093/sols-reconnaissance-et-essais-determination-des-references-de-compactage-du/fa185491/43924

Nina, J. F., Eires, R., Oliveira, D. V. (2023). Earthen Construction: Acceptance among Professionals and Experimental Durability Performance. Construction Materials, 3(2), Article 2. https://doi.org/10.3390/constrmater3020010

Noukpakou, F., Pauporté, E., Pleitinx, R., Wilbaux, Q. (2020). Matériaux locaux de construction et développement durable dans l’Atacora : L’enduit mural dans l’architecture otammari. Congrès International sur le Patrimoine Architectural et Matériaux Locaux de Construction. https://dial.uclouvain.be/pr/boreal/object/boreal:230646

Nouri, M. (2020). Développement d’éléments en biocomposite à base de fibre végétale pour la réhabilitation énergétique des bâtiments. École centrale de Nantes.

Paradis, G. (2009). Akoègninou A., van der Burg W.J., van der Maesen L.J.G. (éditeurs en chef), 2006 – Flore Analytique du Bénin. Backhuys Publishers. XXII. https://www.persee.fr/doc/jobot_1280-8202_2009_num_45_1_1063

Plazonić, I., Barbarić-Mikočević, Ž., Antonović, A. (2016). Chemical Composition of Straw as an Alternative Material to Wood Raw Material in Fibre Isolation. Drvna Industrija, 67(2), 119‑125. https://doi.org/10.5552/drind.2016.1446

Santos, S. F., Teixeira, R. S., Savastano Junior, H. (2017). 3—Interfacial transition zone between lignocellulosic fiber and matrix in cement-based composites. In H. Savastano Junior, J. Fiorelli, & S. F. dos Santos (Éds.), Sustainable and Nonconventional Construction Materials using Inorganic Bonded Fiber Composites (p. 27‑68). Woodhead Publishing. https://doi.org/10.1016/B978-0-08-102001-2.00003-6

Sorgho, B., Zerbo, L., Keita, I., et al. (2014). Strength and creep behavior of geomaterials for building with tannin addition. Materials and structures, 47(6), 937‑946. https://doi.org/10.1617/s11527-013-0104-7

Tlaiji, G., Ouldboukhitine, S., Pennec, F., Biwole, P. (2022). Thermal and mechanical behavior of straw-based construction : A review. Construction and Building Materials, 316, 125915. https://doi.org/10.1016/j.conbuildmat.2021.125915

Tleuberdinova, A., Alzhanova, F., Nurlanova, N. (2024). Trap and dilemma of urbanisation : Comparative analysis and conclusions for accelerated urbanisation policies. Journal of Infrastructure, Policy and Development, 8(4), Article 4. https://doi.org/10.24294/jipd.v8i4.2991

Tossim, M. J., Tombar, P. A., Banakinao, S., et al. (2024). Analysis of the Choice of Cement in Construction and Its Impact on Comfort in Togo. Sustainability, 16(17), Article 17. https://doi.org/10.3390/su16177359

Vandenbossche Maréchal, V. (1998). Fractionnement des tiges et capitules de tournesol : Hydrodistillation d’une huile essentielle odorante, extraction et modification chimique de pectines, et mise en forme d’agromatériaux biodégradables [These de doctorat, Toulouse, INPT]. https://theses.fr/1998INPT025C

Verspieren. (2024, janvier 23). Découvrez les avantages des matériaux de construction biosourcés et géosourcés | Verspieren. Verspieren, publié le 2024-01-23. https://www.verspieren.com/fr/entreprise/article/avantages-materiaux-de-construction-biosources-geosources

Vissac, A., Colas, E., Fontaine, L., et al. (2012). Protection et conservation du patrimoine architectural en terre par des stabilisants naturels, d’origine animale et végétale. Interactions argiles/biopolymères (projet PaTerre+). Sciences des matériaux du patrimoine culturel, 135‑139. https://hal.science/hal-04038082

Wesonga, R., Kasedde, H., Kibwami, N., Manga, M. (2023). A Comparative Analysis of Thermal Performance, Annual Energy Use, and Life Cycle Costs of Low-cost Houses Made with Mud Bricks and Earthbag Wall Systems in Sub-Saharan Africa. Energy and Built Environment, 4(1), 13‑24. https://doi.org/10.1016/j.enbenv.2021.06.001