Review of Numerical Simulation to Reduce the AC Loss of High Temperature Superconducting Generators

Zengwei Zhang

Article ID: 4023
Vol 6, Issue 6, 2023

VIEWS - 2416 (Abstract)

Abstract


This review of the literature on numerical simulation of high temperature superconducting(HTS) generators and associated struc_x005ftures via finite element method(FEM) software COMSOL MUTIPHYSICS to improve generator efficiency. This paper expounds the optimal
design of HTS generator by different modeling, and finally summarizes the similarities of different designs, forming a literature review.

Keywords


HTS Generators; FEM; COMSOL MUTIPHYSICS; Generator Efficiency

Full Text:

PDF


References


[1] Zhou, X., S. Zou, W. Chen, S. Song, Z. Chen, J. Xu, and M. Yan, 2023: Conceptual design, AC loss calculation, and optimization of an airborne fully high temperature superconducting generator. Physica. C, Superconductivity, 605, 1354207. [2] Komiya, M., and Coauthors, 2020: Conceptual Design and Numerical Analysis of 10 MW Fully Superconducting Synchronous Generators Installed With a Novel Casing Structure. IEEE transactions on applied superconductivity, 30, 1–7. [3] Shafaie, R., and M. Kalantar, 2015: Comparison of Theoretical and Numerical Electromagnetic Modeling for HTS Synchronous Generator. IEEE transactions on applied superconductivity, 25, 1–7. [4] Huang, X., Z. Huang, X. Xu, L. Wang, W. Li, and Z. Jin, 2020: A Fully Coupled Numerical Method for Coated Conductor HTS Coils in HTS Generators. IEEE transactions on applied superconductivity, 30, 1–6. [5] Fukui, S., S. Tsukamoto, K. Nohara, J. Ogawa, T. Sato, and T. Nakamura, 2016: Study on AC Loss Reduction in HTS Coil for Ar_x005fmature Winding of AC Rotating Machines. IEEE transactions on applied superconductivity, 26, 1–5.



DOI: https://doi.org/10.18686/ijmss.v6i6.4023

Refbacks

  • There are currently no refbacks.




Creative Commons License

This site is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.