Reversible logic-based parity generator circuit for nano communication network using QCA

Sravan K. Vittapu, Ravichand Sankuru, Ravi Bolimera, Kuruva Madhu Ramudu, Mekala Rameshwar Reddy, Maddula Manasa Reddy

Article ID: 6236
Vol 7, Issue 2, 2024

VIEWS - 0 (Abstract) 0 (PDF)

Abstract


An alternative to CMOS VLSI called Quantum Cellular Automata (QCA) is presently being researched. Although a few basic logical circuits and devices have been examined, very little, if any, research has been done on the architecture of QCA device systems. In the context of nano communication networks, data transmission that is both dependable and efficient is still critical. The technology known as Quantum Dot Cellular Automata (QCA) has shown great promise in the development of nano-scale circuits because of its extremely low power consumption and rapid functioning. This study introduces a unique nano-communication parity-based arithmetic circuit that is reversible, error-detecting, and error-correcting. The minimal outputs are needed for the proposed structure. Based on QCA technology, the proposed nano-communication network makes use of reversible logic gates. The performance increase of the suggested parity generator and checker circuit is significant in terms of clock delay, size, and number of cells.


Keywords


CMOS; nano communications networks; parity generator; parity checker; reversible logic; VLSI

Full Text:

PDF


References


1. Bagherian Khosroshahy M, Abdoli A, Panahi MM. Novel Feynman-Based Reversible and Fault-Tolerant Nano-communication Arithmetic Architecture Based on QCA Technology. SN Computer Science. 2021; 2(6). doi: 10.1007/s42979-021-00811-5

2. Danehdaran F, Angizi S, Bagherian Khosroshahy M, et al. A combined three and five inputs majority gate-based high performance coplanar full adder in quantum-dot cellular automata. International Journal of Information Technology. 2019; 13(3): 1165-1177. doi: 10.1007/s41870-019-00365-z

3. Ahmad F, John MU, Khosroshahy MB, et al. Performance evaluation of an ultra-high speed adder based on quantum-dot cellular automata. International Journal of Information Technology. 2019; 11(3): 467-478. doi: 10.1007/s41870-019-00313-x

4. Landauer R. Irreversibility and heat generation in the computing process. IBM Journal of Research and Development. 2000; 44(1.2): 261-269. doi: 10.1147/rd.441.0261

5. Bennett CH. Logical Reversibility of Computation. IBM Journal of Research and Development. 1973; 17(6): 525-532. doi: 10.1147/rd.176.0525

6. Panahi MM, Hashemipour O, Navi K. A novel design of a ternary coded decimal adder/subtractor using reversible ternary gates. Integration. 2018; 62: 353-361. doi: 10.1016/j.vlsi.2018.04.014

7. Panahi MM, Hashemipour O, Navi K. A novel design of a multiplier using reversible ternary gates. IEEE.

8. Ahmed S, Naz SF. Notice of Violation of IEEE publication principles: design of cost efficient modular digital QCA circuits using optimized XOR Gate. IEEE Trans Circ Syst II Express Briefs. 2020.

9. Srivastava S, Sarkar S, Bhanja S. Estimation of Upper Bound of Power Dissipation in QCA Circuits. IEEE Transactions on Nanotechnology. 2009; 8(1): 116-127. doi: 10.1109/tnano.2008.2005408

10. Vankamamidi V, Ottavi M, Lombardi F. Two-Dimensional Schemes for Clocking/Timing of QCA Circuits. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems. 2008; 27(1): 34-44. doi: 10.1109/tcad.2007.907020

11. Walus K, Dysart TJ, Jullien GA, et al. QCADesigner: A Rapid Design and Simulation Tool for Quantum-Dot Cellular Automata. IEEE Transactions on Nanotechnology. 2004; 3(1): 26-31. doi: 10.1109/tnano.2003.820815

12. Das JC, De D. Quantum-dot cellular automata based reversible low power parity generator and parity checker design for nanocommunication. Frontiers of Information Technology & Electronic Engineering. 2016; 17(3): 224-236. doi: 10.1631/fitee.1500079

13. Thapliyal H, Ranganathan N. Reversible Logic-Based Concurrently Testable Latches for Molecular QCA. IEEE Transactions on Nanotechnology. 2010; 9(1): 62-69. doi: 10.1109/tnano.2009.2025038

14. Jain V, Sharnma DK, Gaur HM, et al. Comprehensive and comparative analysis of QCA-based circuit designs for next-generation computation. ACM Computing Surveys. 2023; 56(53): 1-36.

15. Sardinha LHB, Costa AMM, Neto OPV, et al. NanoRouter: A Quantum-dot Cellular Automata Design. IEEE Journal on Selected Areas in Communications. 2013; 31(12): 825-834. doi: 10.1109/jsac.2013.sup2.12130015

16. Yao F, Zein-Sabatto MS, Shao G, et al. Nanosensor Data Processor in Quantum-Dot Cellular Automata. Journal of Nanotechnology. 2014; 2014: 1-14. doi: 10.1155/2014/259869

17. Kamaraj A, Abinaya, Ramya S. Design of router using Reversible Logic in Quantum Cellular Automata. 2014 International Conference on Communication and Network Technologies. 2014. doi: 10.1109/cnt.2014.7062764

18. Mohaimeed AA, Rabee BH. Influence of Berry dye on some properties of nanocomposite (PVA/TiO2) films. Optical and Quantum Electronics. 2023; 55(3). doi: 10.1007/s11082-022-04523-9

19. Najm AAA, Alshrefi SM, Hadi ZL, et al. Synthesis of Novel [CdO(75%)/VO2(20%)/SiC(4%): p-Si] Heterojunction Composite Thin Films Decorated with Chlorophyll using Solvothermal-Laser Dual Technique for Solar Cell Applications. Silicon. 2024. doi: 10.1007/s12633-024-02997-8




DOI: https://doi.org/10.24294/can.v7i2.6236

Refbacks

  • There are currently no refbacks.


License URL: https://creativecommons.org/licenses/by/4.0/

This site is licensed under a Creative Commons Attribution 4.0 International License.