Water vapor permeability of smooth cellulose nanofiber film prepared via spraying

Kirubanandan Shanmugam; Narendhar Chandrasekar; Ramachandran Balaji

doi:10.24294/can.v6i1.2068

Water vapor permeability of smooth cellulose nanofiber film prepared via spraying

Kirubanandan Shanmugam, Narendhar Chandrasekar, Ramachandran Balaji

Article ID: 2068
Vol 6, Issue 1, 2023

VIEWS - 1478 (Abstract) 1462 (PDF)

Abstract

Eco-friendly and greener barrier materials are required to replace the synthetic packaging materials as they produce a threat to environment. These can be fabricated by natural polymers such as cellulose nanofiber (CNF). The sustainability of CNF was so amazing due to its potential for circular economy and provides alternative platform for synthetic plastics. The challenging task to fabricate CNF films still existed and also current methods have various limitations. CNF films have good oxygen permeability and the value was lower than synthetic plastics. However, CNF films have poor water vapour permeability and higher than that of synthetic plastics. The fabrication method is one of strong parameters to impact on the water permeability of CNF films. The deposition of CNF suspension on the stainless-steel plate via spraying, is a potential process for fabrication for CNF films acting as barrier material against water vapour. In spraying process, the time required to form CNF films in diameter of 15.9 cm was less than 1 min and it is independent of CNF content in the suspension. The uniqueness of CNF films via the spraying process was their surfaces, such as rough surface exposed to air and smooth surface exposed to stainless steel. Their surfaces were investigated by SEM, AFM and optical profilometry micrographs, confirming that the smooth surface was evaluated notable lower surface roughness. The spray coated surface was smooth and glossy and its impact on the water vapor permeability remains obscure. The spraying process is a flexible process to tailor the basis weight and thickness of CNF films can be adjusted by the spraying of CNF suspension with varying fibre content. The water vapour permeability of CNF films can be tailored via varying density of CNF films. The plot between water vapour transfer rate (WVTR)/water vapour and density of CNF films has been investigated. The WVP of spray coated CNF films varied from 6.99 ± 1.17 × 10⁻¹¹ to 4.19 ± 1.45 × 10⁻¹¹ g/m.s.Pa. with the density from 664 Kg/m³ to 1,412.08 Kg/m³. The WVP of CNF films achieved with 2 wt% CNF films (1,120 Kg/m³) was 3.91 × 10⁻¹¹ g/m.s.Pa. These values were comparable with the WVP of synthetic plastics. Given this correspondence, CNF films via spraying have a good barrier against water vapour. This process is a potential for scale up and commercialization of CNF films as barrier materials.

Keywords

Cellulose Nanofiber (CNF); Spray Coating; Water Vapour Permeability; Water Vapour Transfer Rate (WVTR); Synthetic Plastics

Full Text:

PDF

References

1. Abitbol T, Rivkin A, Cao Y, et al. Nanocellulose, a tiny fiber with huge applications. Current Opinion in Biotechnology 2016; 39: 76–88. doi: 10.1016/j.copbio.2016.01.002.

2. Shanmugam K. Spray coated nanocellulose films-production, characterisation and applications [PhD thesis]. Melbourne: Monash University; 2019.

3. Shanmugam K, Browne C. Nanocellulose and its composite films: Applications, properties, fabrication methods, and their limitations. In: Thomas S, Balakrishnan P (editors). Nanoscale processing. Amsterdam: Elsevier; 2021. p. 247–297.

4. Varanasi S, Batchelor WJ. Rapid preparation of cellulose nanofibre sheet. Cellulose 2013; 20(1): 211–215. doi: 10.1007/s10570-012-9794-1.

5. Shanmugam K, Doosthosseini H, Varanasi S, et al. Flexible spray coating process for smooth nanocellulose film production. Cellulose 2018; 25(3): 1725–1741. doi: 10.1007/s10570-018-1677-7.

6. Shanmugam K, Varanasi S, Garnier G, Batchelor W. Rapid preparation of smooth nanocellulose films using spray coating. Cellulose 2017; 24(7): 2669–2676. doi: 10.1007/s10570-017-1328-4.

7. Li F, Mascheroni E, Piergiovanni L. The potential of nanocellulose in the packaging field: A review. Packaging Technology and Science 2015; 28(6): 475–508. doi: 10.1002/pts.2121.

8. Klemm D, Cranston ED, Fischer D, et al. Nanocellulose as a natural source for groundbreaking applications in materials science: Today’s state. Materials Today 2018; 21(7): 720–748. doi: 10.1016/j.mattod.2018.02.001.

9. American Society of Testing and Materials. ASTM E96/E96M-05 standard test methods for water vapor transmission of materials. West Conshohocken: American Society of Testing and Materials; 2005.

10. Shanmugam K, Chandrasekar N, Balaji R. Barrier performance of spray coated cellulose nanofibre film. Micro 2023; 3(1): 192–207. doi: 10.3390/micro3010014.

11. Beneventi D, Chaussy D, Curtil D, et al. Highly porous paper loading with microfibrillated cellulose by spray coating on wet substrates. Industrial and Engineering Chemistry Research 2014; 53(27): 10982–10989. doi: 10.1021/ie500955x.

12. Beneventi D, Zeno E, Chaussy D. Rapid nanopaper production by spray deposition of concentrated microfibrillated cellulose slurries. Industrial Crops and Products 2015; 72: 200–205. doi: 10.1016/j.indcrop.2014.11.023.

13. Krol LF, Beneventi D, Alloin F, Chaussy D. Microfibrillated cellulose-SiO2 composite nanopapers produced by spray deposition. Journal of Materials Science 2015; 50: 4095–4103. doi: 10.1007/s10853-015-8965-5.

14. Shi Z, Phillips GO, Yang G. Nanocellulose electroconductive composites. Nanoscale 2013; 5: 3194–3201. doi: 10.1039/c3nr00408b.

15. Nair SS, Zhu JY, Deng Y, Ragauskas AJ. High performance green barriers based on nanocellulose. Sustainable Chemical Processes 2014; 2: 23. doi: 10.1186/s40508-014-0023-0.

16. Osong SH, Norgren S, Engstrand P. Processing of wood-based microfibrillated cellulose and nanofibrillated cellulose, and applications relating to papermaking: A review. Cellulose 2016; 23(1): 93–123. doi: 10.1007/s10570-015-0798-5.

17. Shanmugam K, Doosthosseini H, Varanasi S, et al. Nanocellulose films as air and water vapour barriers: A recyclable and biodegradable alternative to polyolefin packaging. Sustainable Materials and Technologies 2019; 22: e00115. doi: 10.1016/j.susmat.2019.e00115.

18. Dufresne A. Nanocellulose: From nature to high performance tailored materials. Berlin: De Gruyter; 2017.

19. Dufresne A. Nanocellulose: A new ageless bionanomaterial. Materials Today 2013; 16(6): 220–227. doi: 10.1016/j.mattod.2013.06.004.

20. Arora A, Padua GW. Review: Nanocomposites in food packaging. Journal of Food Science 2010; 75(1): R43–R49. doi: 10.1111/j.1750-3841.2009.01456.x.

21. Ferrer A, Pal L, Hubbe M. Nanocellulose in packaging: Advances in barrier layer technologies. Industrial Crops and Products 2017; 95: 574–582. doi: 10.1016/j.indcrop.2016.11.012.

22. Pasquier E, Mattos BD, Koivula H, et al. Multilayers of renewable nanostructured materials with high oxygen and water vapor barriers for food packaging. ACS Applied Materials and Interfaces 2022; 14(26): 30236–30245. doi: 10.1021/acsami.2c07579.

23. Niinivaara E, Cranston ED. Bottom-up assembly of nanocellulose structures. Carbohydrate Polymers 2020; 247: 116664. doi: 10.1016/j.carbpol.2020.116664.

24. Lu P, Xiao H, Pan Y. Improving water vapor barrier of green-based nanocellulose film via hydrophobic coating. In: In: Chung SL, Li X (editors). 2014 International Conference on Materials Science and Energy Engineering (CMSEE 2014); 2014 Dec 12–14; Sanya. 2015. p. 700.

25. Chen H, Wang B, Li J, et al. High-strength and super-hydrophobic multilayered paper based on nano-silica coating and micro-fibrillated cellulose. Carbohydrate Polymers 2022; 288: 119371. doi: 10.1016/j.carbpol.2022.119371.

26. Garusinghe UM, Varanasi S, Raghuwanshi VS, et al. Nanocellulose-montmorillonite composites of low water vapour permeability. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2018; 540: 233–241. doi: 10.1016/j.colsurfa.2018.01.010.

27. Li K, Clarkson CM, Wang L, et al. Alignment of cellulose nanofibers: Harnessing nanoscale properties to macroscale benefits. ACS Nano 2021; 15(3): 3646–3673. doi: 10.1021/acsnano.0c07613.

28. Khezerlou A, Tavassoli M, Alizadeh Sani M, et al. Application of nanotechnology to improve the performance of biodegradable biopolymer-based packaging materials. Polymers 2021; 13(24): 4399. doi: 10.3390/polym13244399.

DOI: https://doi.org/10.24294/can.v6i1.2068