A study of electrocatalytic ethanol oxidation of nanoporous PtSi alloy

Nali Lu; Yao Li; Lei Zhang; Yong Fang; Bin Qian; Zhida Han; Xuefan Jiang

doi:10.24294/can.v4i1.1325

A study of electrocatalytic ethanol oxidation of nanoporous PtSi alloy

Nali Lu, Yao Li, Lei Zhang, Yong Fang, Bin Qian, Zhida Han, Xuefan Jiang

Article ID: 1325
Vol 4, Issue 1, 2021

VIEWS - 5212 (Abstract) 2805 (PDF)

Abstract

In recent years, nanoporous alloys have presented the advantages of a large specific surface area, low density, and simple operation, and they have been widely used in the fields of catalysis, magnetism, and medicine. Nanoporous Pt-Si alloy was prepared by melt-spun and chemical dealloying, and was characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscope, and transmission electron microscopy. Pt-Si alloys possess a three-dimensional bicontinuous structure and an average size of 5 nanometers. Compared with commercial Pt/C catalysts, nanoporous Pt-Si alloys exhibit excellent electrocatalytic activity and stability in ethanol-catalyzed oxidation reactions. It is taken into consideration to be a promising catalyst in direct ethanol fuel cells.

Keywords

Dealloying; Nanoporous; Electrocatalysis; Ethanol Oxidation Reaction

Full Text:

PDF

References

1. Hou M, Yi B. Development status of fuel cell technology (in Chinese). Chinese Journal of Power Sources 2008; (10): 649–654.

2. Cook B. Introduction to fuel cells and hydrogen technology. Engineering Science and Education Journal 2002; 11(6): 205–216.

3. Qu Y, Wang L, Li C, et al. Quantitative pinhole on-line electrochemical mass spectrometry study on ethanol electro-oxidation at carbon-supported Pt and Ir-containing catalysts. International Journal of Hydrogen Energy 2017; 42(1): 228–235.

4. Yang W, Lu M, He Y. Performance study of an alkaline direct ethanol fuel cell with a reduced two-dimensional mass transport model. International Journal of Hydrogen Energy 2016; 41(45): 20693–20708.

5. Abrego-Martinez JC, Wang Y, Mendoza-Huizar LH, et al. Mixed-reactant ethanol fuel cell using an electrochemically deposited Ag＠Pt tolerant cathode. International Journal of Hydrogen Energy 2016; 41(48): 23417–23424.

6. Wang J, Wasmus S, Savinell RF. Evaluation of ethanol, 1-propanol, and 2-propanol in a direct oxidation polymer-electrolyte fuel cell. Journal of the Electrochemical Society 1995; 142: 4218–4224.

7. Koh S, Strasser P. Electrocatclysis on bimetallic surfaces: Modifying catalytic reactivity for oxygen reduction by voltammetric surface dealloying. Journal of the American Chemical Society 2007; 129(42): 12624–12625.

8. Kattel S, Wang G, Duan Z. Density functional theory study of oxygen reduction reaction mechanism on Pt alloy catalysts. Journal of Physical Chemistry C 2014; 1: 911.

9. Wang C, Vliet DVD, More K, et al. Multimetallic Au/FePt3 nanoparticles as highly durable electrocatalyst. Nano Letters 2010; 11(3):919–926.

10. Jiang L, Sun G, Sun S, et al. Structure and chemical composition of supported Pt-Sn electrocatalysts for ethanol oxidation. Electrochimica Acta 2005; 50(27): 5384–5389.

11. Yu X, Ye S. Recent advances in activity and durability enhancement of Pt/C catalytic cathode in PEMFC. Journal of Power Sources 2007; 172(1): 145–154.

12. Luo Y, Liang Z, Liao S. Recent development of anode electrocatclysts for direct methanol fuel cells. Chinese Journal of Catalysis 2010; 31(2): 141–149.

13. Senior NA, Newman R. Synthesis of tough nanoporous metals by controlled electrolytic dealloying. Nanotechnology 2006; 17(9): 2311–2316.

14. Stratmann M, Rohwerder M. A pore view of corrosion. Nature 2001; 410：421–423.

15. Erlebacher J. An atomistic description of dealloying-porosity evolution, the critical potential, and rote-limiting behavior. Journal of the Electrochemical Society 2004; 151(10): C614–C626.

16. Chen T, Liu Z, Lu W, et al. Fabrication of free-standing nanoporous silver by selectively dissolving gold from gold-silver alloys via a novel cinverse dealloying method. Electrochemistry Communications 2011; 13(10): 1086–1089.

17. Liu W, Zhang S, Li N, et al. A general dealloying strategy to nanoporous intermetallics, nanoporous metals with bimodal, and unimodal pore size distributions. Corrosion Science 2012; 58(5): 133–138.

18. Kattel S, Duan Z, Wang G. Density functional theory study of an oxygen reduction reaction on a Pt3Ti alloy electrocatalyst. Journal of Physical Chemistry C 2013; 117(14): 7107–7113.

19. Ohyagi S, Sasaki T. Durability of a PEMFC Pt-Co cathode catclyst layer during voltage cycling tests under supersaturated humidity conditions. Electrochimica Acta 2013; 102(15): 336–341.

20. Hoffmannová H, Okube M, Petrykin V, et al. Surface stability of Pt3Ni nanoparticulate alloy electrocatalysts in hydrogen adsorption. Langmuir 2013; 29(29): 9046–9050.

21. Liu Z, Jackson GS, Eichhorn BW. PtSn intermetallic, core-shell, and alloy nanoparticles as co-tolerant electrocatalysts for H2 oxidation. Angewandte Chemie Internation Edition 2010; 49(18): 3173–3176.

22. Pereira LGS, Paganin VA, Ticianelli EA. Investigation of the CO tolerance mechanism at several Pt-based bimetallic anode electrocatalysts in a PEM fuel cell. Electrochim Acta 2009; 54(7): 1992–1998.

23. Rohner A, Han B, Jensen JO, et al. Pt-Si bifunctional surfaces for CO and methanol electro-oxidation. Journal of Physical Chemistry C 2015; 119(15): 8023–8031.

DOI: https://doi.org/10.24294/can.v4i1.1325