Template assisted nano-structured nickel for efficient methanol oxidation

S Mohanapriya; V Raj

doi:10.24294/can.v4i2.1294

Template assisted nano-structured nickel for efficient methanol oxidation

S Mohanapriya, V Raj

Article ID: 1294
Vol 4, Issue 2, 2021

VIEWS - 968 (Abstract) 292 (PDF)

Abstract

Nanoporous nickel has been prepared by electrodeposition using non-ionic surfactant based liquid crystalline template under optimized processing conditions. Physicochemical properties of nanoporous nickel are systematically characterized through XRD, SEM and AFM analyses. Comparison of electrocatalytic activity of nanoporous nickel with smooth nickel was interrogated using cyclic voltammetry (CV), chronoamperometry (CA) and electrochemical impedance spectroscopy (EIS) analyses. Distinctly enhanced electrocatalytic activity with improved surface poisoning resistance related to nanoporous nickel electrode towards methanol oxidation stems from unique nanoporous morphology. This nanoporous morphology with high surface to volume ratio is highly beneficial to promote active catalytic centers to offer readily accessible Pt catalytic sites for MOR, through facilitating mass and electron transports.

Keywords

Template Deposition; Electrocatalysis; Methanol Oxidation; Direct Methanol Fuel Cell

Full Text:

PDF

References

1. Liu H, Song C, Zhang L, et al. A review of anode catalysis in the direct methanol fuel cell. Journal of Power Sources 2006; 155(2): 95–110.

2. Neburchilov V, Martin J, Wang H, et al. A review of polymer electrolyte membranes for direct methanol fuel cells. Journal of Power Sources 2007; 169(2): 221–238.

3. Mohanapriya S, Bhat SD, Sahu AK, et al. A new mixed-matrix membrane for DMFCs. Energy & Environmental Science 2009; 2(11): 1210–1216.

4. Mohanapriya S, Bhat SD, Sahu AK, et al. Sodium-alginate-based proton-exchange membranes as electrolytes for DMFCs. Energy & Environmental Science 2010; 3(11): 1746–1756.

5. Mohanapriya S, Sahu AK, Bhat SD, et al. Bio-composite membrane electrolytes for direct methanol fuel cells. Journal of the Electrochemical Society 2011; 158(11): B1319–B1328.

6. Mohanapriya S, Bhat SD, Sahu AK, et al. Modified-bio-polymeric-mixed-matrix-membrane electrolytes for direct methanol fuel cells. Journal of Bionanoscience 2009; 3(2): 131–138.

7. Suganthi S, Mohanapriya S, Raj V. Biocomposite proton-exchange membrane electrolytes for direct methanol fuel cells. Journal of Applied Polymer Science 2016; 133(25): 43514.

8. Iwasita T. Electrocatalysis of methanol oxidation. Electrochimica Acta 2002; 47: 3663–3674.

9. Radmilovic V, Gasteiger H A, Ross P N. Structure and chemical composition of a supported Pt-Ru electrocatalyst for methanol oxidation. Journal of Catalysis 1995; 154(1): 98–106.

10. Antolini E, Salgado J, Gonzalez ER. The methanol oxidation reaction on platinum alloys with the first row transition metals: The case of Pt–Co and –Ni alloy electrocatalysts for DMFCs: A short review. Applied Catalysis B Environmental 2006; 63(1-2): 137–149.

11. Wasmus S, Kuver A. Methanol oxidation and direct methanol fuel cells: A selective review. Journal of Electroanalytical Chemistry 1999; 461(1-2): 14–31.

12. Iwasita T, Hoster H, John-Anacker A, et al. Methanol oxidation on PtRu electrodes. Influence of surface structure and Pt-Ru atom distribution. Langmuir 2000; 16(2): 522–529.

13. Wang K, Gasteiger HA, Markovic NM, et al. On the reaction pathway for methanol and carbon monoxide electrooxidation on Pt-Sn alloy versus Pt-Ru alloy surfaces. Electrochimica Acta 1996; 41(16): 2587–2593.

14. Hu Y, Zhang H, Wu P, et al. Bimetallic Pt-Au nanocatalysts electrochemically deposited on graphene and their electrocatalytic characteristics towards oxygen reduction and methanol oxidation. Physical Chemistry Chemical Physics Cambridge Royal Society of Chemistry 2011; 13: 4083-4094.

15. Liu X, Cui C, Gong M, et al. Pt–Ni alloyed nanocrystals with controlled architectures for enhanced methanol oxidation. Chemical Communications 2013; 49:8704–8706.

16. Xu D, Liu Z, Yang H. Solution-based evolution and enhanced methanol oxidation activity of monodisperse platinum-copper nanocubes. Angewandte Chemie International Edition 2009; 48(23): 4217–4221.

17. Mohanapriya S, Suganthi S, Raj V. Mesoporous Pt–Ni catalyst and their electro catalytic activity towards methanol oxidation. Journal of Porous Materials2017; 24(2): 355–365.

18. Abdel Rahim MA, Hassan HB, Abdel Ham RM. Graphite electrodes modified with platinum-nickel nano-particles for methanol oxidation. Fuel cells 2007; 7(4): 298–305

19. Niu Z, Wang D, Yu R, et al. Highly branched Pt–Ni nanocrystals enclosed by stepped surface for methanol oxidation. Chemical Science 2012; 3(6): 1925–1929.

20. Ganesh V, Lakshminarayanan V. Preparation of high surface area nickel electrodeposit using a liquid crystal template technique. Electrochimica Acta 2004; 49(21): 3561–3572.

21. Xia Y, Xiong Y, Lim B, et al. Shape-controlled synthesis of metal nanocrystals: Simple chemistry meets complex physics? Angewandte Chemie International Edition 2009; 48(1): 60–103.

22. Mohanapriya S, Tintula KK, Bhat SD, et al. A novel multi-walled carbon nanotube (MWNT)-based nanocomposite for PEFC electrodes. Bulletin of Materials Science 2012; 35(3): 297–303.

23. Julia van D, Brandy Kinkead P, Yoseif M, et al. Electrochemically active nickel foams as support materials for nanoscopic platinum electrocatalysts. ACS Applied Materials & Interfaces 2014; 6(15): 1–73.

24. Mohanapriya S, Suganthi S, Raj V. Mesoporous Pt–Ni catalyst and their electro catalytic activity towards methanol oxidation. Journal of Porous Materials 2017; 24(2): 355–365.

25. Xing W, Li F, Yan Z, et al. Synthesis and electrochemical properties of mesoporous nickel oxide. Journal of Power Sources 2004; 134(2): 324–330.

26. Skowronski JM, Wazny A. Nickel foam-based Ni(OH)2/NiOOH electrode as catalytic system for methanol oxidation in alkaline solution. Journal of New Materials for Electrochemical Systems 2006; 9(4): 345–351.

27. Rahim M, Hameed R, Khalil MW. Nickel as a catalyst for the electro-oxidation of methanol in alkaline medium. Journal of Power Sources 2004; 134(2): 160–169.

DOI: https://doi.org/10.24294/can.v4i2.1294