Enhancing the engineering properties of gypseous soils by adding the Anthan polymers

Naser Abed Hassan, Hassan Ali Ahmed, Akram Khalaf Mohammed

Article ID: 2828
Vol 7, Issue 1, 2024

VIEWS - 269 (Abstract) 60 (PDF)

Abstract


Large areas of soil in Iraq are formed up of gypsum soil. As a result, understanding the habits of this soil and its treatment approach is critical, because its current solution is to replace gypsum soil before beginning any building activity. This study used gypsum soil from Tikrit City, which has a gypsum concentration that is around 38%, and the goal of the study is to illustrate the impact of the polymer on the gypsum soil parameters. Simultaneously, researchers are investigating the beneficial effects of polymers on the behavior of gypsum soil. The percentages of the polymer additive (5%, 7.5%, 10%, 12.5%, and 15%) were weight percentages, while the soil tests were chemical, physical, and engineering. When the percentage of additive was increased from 0% to 15%, Soil engineering characteristics enhanced the collapse of the from 5.11 to 1.21, cohesion improved from (28.98 KN/m2) to (51.16 KN/m2), and angles of internal friction decreased from 33.190 to 38.850.


Keywords


polymer filling; shear; collapsibility; soil; gypseous soil

Full Text:

PDF


References


1. Food and Agriculture Organization of the United Nations. Management of gypsiferous soils. Available online: https://www.fao.org/soils-portal/soil-management/management-of-some-problem-soils/gypsiferous-soils/en/ (accessed on 5 January 2024).

2. Salih MA, Abang Ali AA, Farzadnia N. Characterization of mechanical and microstructural properties of palm oil fuel ash geopolymer cement paste. Construction and Building Materials 2014; 65: 592–603. doi: 10.1016/j.conbuildmat.2014.05.031

3. Abed N, Abbas JK. Effect of iron filling on the behaviour of gypseous soils. Journal of Mechanical Engineering Research and Developments 2020; 43(7): 442–448.

4. Ibrahim TK, Mohammed MK, Awad OI, et al. A comprehensive review on the exergy analysis of combined cycle power plants. Renewable and Sustainable Energy Reviews 2018; 90: 835–850. doi: 10.1016/j.rser.2018.03.072.

5. Ibrahim TK, Basrawi F, Mohammed MN, Ibrahim H. Effect of perforation area on temperature distribution of the rectangular fins under natural convection. ARPN Journal of Engineering and Applied Sciences 2016; 11(10): 6371–6375.‏

6. Ibrahim TK, Mohammed MN, Kamil Mohammed M, et al. Experimental study on the effect of perforations shapes on vertical heated fins performance under forced convection heat transfer. International Journal of Heat and Mass Transfer 2018; 118: 832–846. doi: 10.1016/j.ijheatmasstransfer.2017.11.047

7. Mohammed MN, Yusoh KB, Shariffuddin JHBH. Methodized depiction of design of experiment for parameters optimization in synthesis of poly(Nvinylcaprolactam) thermoresponsive polymers. Materials Research Express 2016; 3(12): 125302. doi: 10.1088/2053-1591/3/12/125302‏

8. Mohammed MN, Yusoh KB, Shariffuddin JHBH. Parametric optimization of the poly (nvinylcaprolactam) (PNVCL) thermoresponsive polymers synthesis by the response surface methodology and radial basis function neural network. MATEC Web of Conferences 2018; 225: 02023. doi: 10.1051/matecconf/201822502023‏

9. Mohammed MN, Yusoh KB, Shariffuddin JHBH. Poly(N-vinyl caprolactam) thermoresponsive polymer in novel drug delivery systems: A review. Materials Express 2018; 8(1): 21–34. doi: 10.1166/mex.2018.1406

10. Mohammed MN, Yusoh KB, Ismael MN, et al. Synthesis of thermo-responsive poly(N-vinylcaprolactam): RSM-based parameters optimization. Multiscale and Multidisciplinary Modeling, Experiments and Design 2019; 2(3): 199–207. doi: 10.1007/s41939-019-00045-2‏

11. Ibrahim TK, Mohammed MN. Thermodynamic evaluation of the performance of a combined cycle power plant. International Journal of Energy Science and Engineering 2015; 1(2): 60–70.

12. Abdulrahman SM, Ihsan EA, Sabri WA. Experimental study to effect of adding emulsion rubber material (SPR) for the shear parameters of soil Gypsum. IOP Conference Series: Materials Science and Engineering 2020; 745(1): 012124. doi: 10.1088/1757-899x/745/1/012124

13. Abdulrahman SM, Ihsan EAAA. Influences of eggshell powder to reduce the collapse of soil gypsum. IOP Conference Series: Materials Science and Engineering 2020; 745(1): 012135. doi: 10.1088/1757-899x/745/1/012135

14. Aziz HY, Ma J. Gypseous soil improvement using fuel oil. International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering 2011; 5(3): 123–127.‏

15. Al-Zabedy S, Al-Kifae A. Controlling collapsibility potential by improving Iraqi gypseous soils subsidence: A Review study. IOP Conference Series: Materials Science and Engineering 2020; 745: 012107. doi: 10.1088/1757-899x/745/1/012107‏

16. Ibrahim AN, Schanz T. Gypseous soil improvement by silicone oil. Al-Nahrain Journal for Engineering Sciences 2017; 20(1): 49–58.‏

17. Karim H, Al-Obaidi Q, Al-Shamoosi A. Variation of matric suction as a function of gypseous soil dry density. Engineering and Technology Journal 2020; 38(6): 861–868. doi: 10.30684/etj.v38i6a.550‏

18. Al-Neami MAM. Improvement of gypseous soil by clinker additive. Engineering and Technology Journal 2010; 28(19): 5822–5832.‏

19. Ayeldeen M, Azzam W, Siragy M. Geotechnical characteristics of fiber cemented collapsible soil. Life Science Journal 2019; 16(9): 9–22.

20. Ahmed BA, Th Al-Hadidi M, Mohammed DW. Improvement of the gypseous soil properties by using copolymer and styrene-butadiene rubber. IOP Conference Series: Materials Science and Engineering 2020; 737(1): 012084. doi: 10.1088/1757-899x/737/1/012084‏

21. Abd Al-Kaream KW, Fattah MY, Hameedi MK. Compressibility and strength development of soft soil by polypropylene fiber. International Journal of Geomate 2022; 22(93): 91–97. doi: 10.21660/2022.93.3206‏

22. Khodabandeh MA, Nagy G, Török Á. Stabilization of collapsible soils with nanomaterials, fibers, polymers, industrial waste, and microbes: Current trends. Construction and Building Materials 2023; 368: 130463. doi: 10.1016/j.conbuildmat.2023.130463‏

23. Filimon A. Smart Materials: Integrated Design, Engineering Approaches, and Potential Applications. CRC Press; 2018.‏

24. Hassler RA, Doherty DH. Genetic engineering of polysaccharide structure: production of variants of xanthan gum in xanthomonas campestris. Biotechnology Progress 1990; 6(3): 182–187. doi: 10.1021/bp00003a003

25. Garcı́a-Ochoa F, Santos VE, Casas JA, et al. Xanthan gum: production, recovery, and properties. Biotechnology Advances 2000; 18(7): 549–579. doi: 10.1016/s0734-9750(00)00050-1

26. Lee S, Chang I, Chung MK, et al. Geotechnical shear behavior of xanthan gum biopolymer treated sand from direct shear testing. Geomechanics and Engineering 2017; 12(5): 831–847.‏

27. Al-Mufty A, Hameed I. Gypsum content determination in gypseous soils and rocks. In: Proceedings of the 3th Jordanian International Mining Conference; 25–28 April 2000; Amman, Jordan. pp. 485–492.




DOI: https://doi.org/10.24294/ace.v7i1.2828

Refbacks

  • There are currently no refbacks.


License URL: https://creativecommons.org/licenses/by-nc/4.0/