Thermal degradation of 3D printing processed polylactide samples by means of vibrational spectroscopy

P. Siafarika, D.E. Mouzakis, N.K. Nasikas, A.G. Kalampounias

Article ID: 2258
Vol 7, Issue 1, 2024

VIEWS - 226 (Abstract) 117 (PDF)

Abstract


In the present study, we utilized the fused deposition modeling technique (FDM) to prepare polylactide (PLA) samples and evaluate in real time their thermal degradation by means of vibrational spectroscopy. The FDM method is probably the most popular technology among 3D printing technologies due to the inexpensive and flexible extrusion systems used for the handling of several thermoplastic materials. Nevertheless, a thermal degradation phenomenon of the 3D-printed thermoplastic PLA samples occurs, which is an inevitable issue for long-term reliability of the material leading to poor product properties. We recorded the Fourier transform infrared spectra in real-time mode to monitor the thermal degradation kinetics of PLA samples at a specific temperature below the glass transition point and explore the induced structural alterations. The absorbance of specific spectral features was used to evaluate the concentration reduction of PLA functional groups during the thermal degradation process. The kinetics of the thermal degradation was estimated by means of the absorbance of the C-COO band which reflects the scission of the ester linkage due to degradation process. The kinetic rate constant was found Kt = 2.30 × 10−3 s−1. The results reported in this work were analyzed and discussed in view of relevant data reported for PLA samples prepared with traditional mechanical processing.


Keywords


polylactide; FTIR spectroscopy; degradation kinetics; real-time monitoring; 3D printing

Full Text:

PDF


References


1. Tsuji H, Ikada Y. Properties and morphologies of poly(l-lactide): 1. Annealing condition effects on properties and morphologies of poly(l-lactide). Polymer 1995; 36(14): 2709–2716. doi: 10.1016/0032-3861(95)93647-5

2. Martin O, Avérous L. Poly(lactic acid): Plasticization and properties of biodegradable multiphase systems. Polymer 2001; 42(14): 6209–6219. doi: 10.1016/S0032-3861(01)00086-6

3. Dash A, Kabra S, Misra S, et al. Comparative property analysis of fused filament fabrication PLA using fresh and recycled feedstocks. Materials Research Express 2022; 9(11): 115303. doi: 10.1088/2053-1591/ac96d4

4. Peelman N, Ragaert P, Ragaert K, et al. Heat resistance of biobased materials, evaluation and effect of processing techniques and additives. Polymer Engineering & Science 2018; 58(4): 513–520. doi: 10.1002/pen.24760

5. Lunt J. Large-scale production, properties and commercial applications of polylactic acid polymers. Polymer Degradation and Stability 1998; 59(1–3): 145–152. doi: 10.1016/S0141-3910(97)00148-1

6. Södergård A, Stolt M. Properties of lactic acid based polymers and their correlation with composition. Progress in Polymer Science 2002; 27(6): 1123–1163. doi: 10.1016/S0079-6700(02)00012-6

7. Xing R, Huang R, Qi W, et al. Three-dimensionally printed bioinspired superhydrophobic PLA membrane for oil-water separation. AIChE Journal 2018; 64(10): 3700–3708. doi: 10.1002/aic.16347

8. Middleton JC, Tipton AJ. Synthetic biodegradable polymers as orthopedic devices. Biomaterials 2000; 21(23): 2335–2346. doi: 10.1016/S0142-9612(00)00101-0

9. Saini P, Arora M, Ravi Kumar MNV. Poly(lactic acid) blends in biomedical applications. Advanced Drug Delivery Reviews 2016; 107: 47–59. doi: 10.1016/j.addr.2016.06.014

10. Rocha DB, Souza de Carvalho J, de Oliveira SA, dos Santos Rosa D. A new approach for flexible PBAT/PLA/CaCO3 films into agriculture. Journal of Applied Polymer Science 2018; 135(35): 46660. doi: 10.1002/app.46660

11. Auras R, Harte B, Selke S. An Overview of polylactides as packaging materials. Macromolecular Bioscience 2004; 4(9): 835–864. doi: 10.1002/mabi.200400043

12. Auras R, Lim LT, Selke SEM, Tsuji H. Poly(Lactic Acid): Synthesis, Structures, Properties, Processing, and Applications. John Wiley & Sons; 2011.

13. Castro-Aguirre E, Iñiguez-Franco F, Samsudin H, et al. Poly(lactic acid)—Mass production, processing, industrial applications, and end of life. Advanced Drug Delivery Reviews 2016; 107: 333–366. doi: 10.1016/j.addr.2016.03.010

14. Tokiwa Y, Calabia BP, Ugwu CU, Aiba S. Biodegradability of plastics. International Journal of Molecular Sciences 2009; 10(9): 3722–3742. doi: 10.3390/ijms10093722

15. Kopinke FD, Mackenzie K. Mechanistic aspects of the thermal degradation of poly(lactic acid) and poly(β-hydroxybutyric acid). Journal of Analytical and Applied Pyrolysis 1997; 40–41: 43–53. doi: 10.1016/S0165-2370(97)00022-3

16. Lin Z, Guo X, He Z, et al. Thermal degradation kinetics study of molten polylactide based on Raman spectroscopy. Polymer Engineering & Science 2021; 61(1): 201–210. doi: 10.1002/pen.25568

17. Kalampounias AG, Kastrissios DT, Yannopoulos SN. Structure and vibrational modes of sulfur around the λ-transition and the glass-transition. Journal of Non-Crystalline Solids 2003; 326–327: 115–119. doi: 10.1016/S0022-3093(03)00388-0

18. Kalampounias AG, Kirillov SA, Steffen W, Yannopoulos SN. Raman spectra and microscopic dynamics of bulk and confined salol. Journal of Molecular Structure 2003; 651–653: 475–483. doi: 10.1016/S0022-2860(03)00128-5

19. Latsis GK, Banti CN, Kourkoumelis N, et al. Poly organotin acetates against DNA with possible implementation on human breast cancer. International Journal of Molecular Sciences 2018; 19(7): 2055. doi: 10.3390/ijms19072055

20. Wrona M, Cran MJ, Nerin C, Bigger SW. Development and characterisation of HPMC films containing PLA nanoparticles loaded with green tea extract for food packaging applications. Carbohydrate Polymers 2017; 156: 108–117. doi: 10.1016/j.carbpol.2016.08.094

21. Dharmalingam K, Anandalakshmi R. Fabrication, characterization and drug loading efficiency of citric acid crosslinked NaCMC-HPMC hydrogel films for wound healing drug delivery applications. International Journal of Biological Macromolecules 2019; 134: 815–829. doi: 10.1016/j.ijbiomac.2019.05.027

22. Jamshidi K, Hyon SH, Ikada Y. Thermal characterization of polylactides. Polymer 1988; 29(12): 2229–2234. doi: 10.1016/0032-3861(88)90116-4

23. Liu X, Zou Y, Li W, et al. Kinetics of thermo-oxidative and thermal degradation of poly(D,L-lactide) (PDLLA) at processing temperature. Polymer Degradation and Stability 2006; 91(12): 3259–3265. doi: 10.1016/j.polymdegradstab.2006.07.004

24. Acierno S, Van Puyvelde P. Rheological behavior of polyamide 11 with varying initial moisture content. Journal of Applied Polymer Science 2005; 97(2): 666–670. doi: 10.1002/app.21810




DOI: https://doi.org/10.24294/ace.v7i1.2258

Refbacks

  • There are currently no refbacks.


License URL: https://creativecommons.org/licenses/by-nc/4.0/