Production of Zn-Ti alloy electrodeposition for biomedical applications
Vol 7, Issue 1, 2024
VIEWS - 386 (Abstract) 220 (PDF)
Abstract
Acidic sulphate bath having ZnSO4, TiSO4 and sulphamic acid, was optimized for the deposition of bright Zn-Ti coating on mild steel. The effect of current density, on deposit characters, such as corrosion rate, thickness, and hardness were discussed. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) methods were used to evaluate the corrosion properties of the deposit. The composition of deposits was determined by energy dispersive X-ray (EDX) analysis. Scanning electron microscopy (SEM) was used to examine the surface topography of the deposited layer. Atomic force microscopy (AFM) was used to determine the surface roughness. A new and low-priced sulphate bath, for bright Zn-Ti coatings on mild steel has been proposed, and the results indicate better corrosion resistance properties, and these coatings can be used for biomedical tools like Tuning fork, etc, applications.
Keywords
Full Text:
PDFReferences
1. Roev VG, Kaidrikov RA, Khakimullin AB. Zinc-Nickel electroplating from Alkaline electrolytes containing Amino compounds. Russian Journal Electrochemistry 2001; 37(7): 756–759. doi: 10.1023/A:1016785105516
2. Gahoi A, Wagner S, Bablich A, et al. Contact resistance study of various metal electrodes with CVD graphene. Solid State Electronics 2016; 125: 234–239. doi: 10.1016/j.sse.2016.07.008
3. Triclot P. Metal-on-metal: history, state of the art. International Orthopaedics 2011; 35(2): 201–206. doi: 10.1007/s00264-010-1180-8
4. Gotman I. Characteristics of metals used in implants. Journal of Endourology 1997; 11(6): 383–389. doi: 10.1089/end.1997.11.383
5. Liu Y, Zheng Y, Chen XH, et al. Fundamental theory of biodegradable metals—definition, criteria, and design. Advanced Functional Materials 2019; 29(18): 1805402. doi: 10.1002/adfm.201805402
6. Zhang S, Zhang X, Zhao C, et al. Research on an Mg-Zn alloy as a degradable biomaterial. Acta Biomaterialia. 2010; 6(2): 626-640. doi.org/10.1016/j.actbio.2009.06.028
7. Gay PA, Berçot P, Pagetti J. Electrodeposition and characterisation of Ag–ZrO2 electroplated coatings. Surface and Coatings Technology 2001; 140(2): 147–154. doi: 10.1016/S0257-8972(01)01043-X
8. Bhat R, Bekal S, Hegde AC. Fabrication of Zn-Ni alloy coatings from Acid Chloride Bath and its corrosion performance. Analytical and Bioanalytical Electrochemistry 2018; 10(12): 1562–1573.
9. Bhat RS, Balakrishna MK, Parthasarathy P, Hegde AC. Structural properties of Zn-Fe alloy coatings and their corrosion resistance. Coatings 2023; 13(4): 772. doi: 10.3390/coatings13040772
10. Bhat RS, Nagaraj P, Priyadarshini S. Zn–Ni compositionally modulated multilayered alloy coatings for improved corrosion resistance. Surface Engineering 2020; 37(6): 755–763. doi: 10.1080/02670844.2020.1812479
11. Yao Y, Yao S, Zhang L, Wang H. Electrodeposition, and mechanical and corrosion resistance properties of Ni-W/SiC nanocomposite coatings. Materials Letters 2007; 61(1): 67–70. doi.org/10.1016/j.matlet.2006.04.007
12. Blejan D, Bogdana D, Popb M, et al. Structure, morphology and corrosion resistance of Zn-Ni-TiO2 composite coatings. Optoelectronics and Advanced Materials—Rapid Communications 2011; 5(1): 25–29.
13. Brenner A. Electrodeposition of Alloys, 1st ed. Academic Press; 1963.
14. Abou-Krisha MM. Effect of pH and Current Density on the Electrodeposition of Zn-Ni-Fe Alloys from a Sulfate Bath. J. Coat. Tech. Res. 2012; 9: 775–783. doi: 10.1007/s11998-012-9402-1
15. Hanawa T. Titanium-Tissue interface reaction and its control with surface treatment. Frontiers in Bioengineering and Biotechnology 2019; 7: 170. doi: 10.3389/fbioe.2019.00170
16. Oliveira NTC, Guastaldi AC, Electrochemical stability, and corrosion resistance of Ti–Mo alloys for biomedical applications. Acta Biomater 5(2009): 399–405. doi: 10.1016/j.actbio.2008.07.010
17. Kremann R. The electrolytic representation of bearings from aqueous solutions (German). Vieweg + Teubner Verlag Wiesbaden; 1914.
18. Shahini A, Yazdimamaghani M, Walker K, et al. 3D conductive nanocomposite scaffold for bone tissue engineering. International Journal of Nanomedicine 2014; 9: 167–181. doi: 10.2147/IJN.S54668
19. Yazdimamaghani M, Razavi M, Vashaee D, Tayebi L. Microstructural and mechanical study of PCL coated Mg scaffolds. Surf. Eng 2014; 30: 920–926. doi: 10.1179/1743294414Y.0000000307
20. Kuru H, Kockar H, Alper M, Karaagac O. Growth of binary Ni-Fe films: Characterisations at low and high potential levels. Journal of Magnetism and Magnetic Materials 2015; 377: 59–64. doi: 10.1016/j.jmmm.2014.10.058
21. Elahinia MH, Hashemi M, Tabesh M, Bhaduri SB. Manufacturing and processing of NiTi implants: A review. Progress in Materials Science 2012; 57(5): 911–946. doi: 10.1016/j.pmatsci.2011.11.001
22. Toker SM, Canadinc D, Maier HJ, Birer O. Evaluation of passive oxide layer formation–biocompatibility relationship in NiTi shape memory alloys: Geometry and body location dependency. Materials Science and Engineering C 2014; 36(1): 118–129. doi: 10.1016/j.msec.2013.11.040
23. Braz Fernandes FM, Mahesh KK, Martins RMS, et al. Simultaneous probing of phase transformations in Ni-Ti thin film shape memory alloy by synchrotron radiation-based X-ray diffraction and electrical resistivity. Materials Characterization 2013; 76: 35–38. doi: 10.1016/j.matchar.2012.11.009
24. McMahon RE, Ma J, Verkhoturov SV, et al. A comparative study of the cytotoxicity and corrosion resistance of nickel–titanium and titanium–niobium shape memory alloys. Acta Biomaterialia 2012;8(7): 2863–2870. doi: 10.1016/j.actbio.2012.03.034
25. Fadlallah SA, El-Bagoury N, Gad El-Rab SMF, et al. An overview of NiTi shape memory alloy: Corrosion resistance and antibacterial inhibition for dental application. Journal of Alloys and Compounds 2014; 583: 455–464. doi: 10.1016/j.jallcom.2013.08.029
26. Tria S, Elkedim O, Hamzaoui R, et al. Deposition and characterization of cold sprayed nanocrystalline NiTi. Powder Technology 2011; 210(2): 181. doi: 10.1016/j.powtec.2011.02.026
27. Sharma SK, Mohan S. Effect of chemical treatment on surface characteristics of sputter deposited Ti-rich NiTi shape memory alloy thin-films. Journal of Alloys and Compounds 2014; 592: 170–175. doi: 10.1016/j.jallcom.2013.12.266
28. Zeng Q, Xu Y. A comparative study on the tribocorrosion behaviors of AlFeCrNiMo high entropy alloy coatings and 304 stainless steels. Mater. Today Commun 2020; 24: 101261.
29. Tosun G, Ozler L, Kaya M, Orhan N. A study on microstructure and porosity of NiTi alloy implants produced by SHS. Journal of Alloys and Compounds 2009; 487(1): 605–611. doi: 10.1016/j.jallcom.2009.08.023
30. Kanani N. Electroplating—Basic Principles, Processes and Practice. Elsevier; 2006.
31. Bhat R, Bhat UK, Hegde AC. Optimization of deposition conditions for bright Zn-Fe coatings and its characterization. Prot. Met. Phys. Chem. Surf. 2011; 47: 645. doi.org/10.1134/S2070205111050030
32. Bhat RS, Shet VB. Development, and characterization of Zn–Ni, Zn–Co and Zn–Ni–Co coatings. Surface Engineering 2020; 36: 429–437. doi: 10.1080/02670844.2019.1680037
33. Vogel AI. Quantitative Inorganic Analysis. Longmans Green and Co, London; 1951.
34. Bhat RS , Hegde AC. Corrosion Behavior of Electrodeposited Zn-Ni, Zn-Co and Zn-Ni-Co Alloys. Anal. Bioanal. Electrochem. 2011; 3(3): 302–315.
35. Bhat RS, Hegde AC. Optimization of bright Zn-Co-Ni alloy coatings and its characterization. Anal. Bioanal. Electrochem. 2013; 5(5): 609–621.
36. Bhat RS, Bhat KU, Hegde AC. Layered coating of Zn-Co alloys on mild steel using triangular current pulses for better corrosion protection, Trans. Indian Inst. Met. 2013; 66(6): 193–199. doi: 10.1007/s12666-013-0242-1
37. Abou-Krisha MM. Effect of pH and current density on the electrodeposition of Zn–Ni–Fe alloys from a sulfate bath. Journal of Coatings Technology and Research 2012; 9(6): 775–783. doi: 10.1007/s11998-012-9402-1
38. Bhat RS. Fabrication of Multi-Layered Zn-Fe alloy coatings for better corrosion performance. In: Liquid Metals. IntechOpen. 2021.
39. Tozar A, Karahan IH. Structural and corrosion protection properties of electrochemically deposited nano-sized Zn–Ni alloy coatings. Applied Surface Science 2014; 318: 15–23. doi: 10.1016/j.apsusc.2013.12.020
DOI: https://doi.org/10.24294/ace.v7i1.2084
Refbacks
- There are currently no refbacks.
License URL: https://creativecommons.org/licenses/by-nc/4.0/