Six Sigma is an organized and systematic method for strategic process improvement that relies on statistical and scientific methods to reduce the defect rates and achieve significant quality up-gradation. Six Sigma is also a business philosophy to improve customer satisfaction, a tool for eliminating process variation and errors and a metric of world class companies allowing for process comparisons. Six Sigma is one of the most effective advanced improvement strategies which has direct impact on operational excellence of an organization. Six Sigma may also be defined as the powerful business strategies, which have helped to improve quality initiatives in many industries around the world. With the use of Six Sigma in casting industries, rejection rate is reduced, customer satisfaction is improved and financial benefits also increased. Six Sigma management uses statistical process control to relentlessly and rigorously pursue the reduction of variation in all critical processes to achieve continuous and breakthrough improvements that impact the bottom-line and/or top-line of the organization and increase customer satisfaction. In this paper author reviewed some of the significant previous published papers and focused on the general overview of publication in casting industries.

1. Swift RE, Jackson JH, Eastwood LW. A study of principles of gating. AFS Transactions 1949; 57: 76–88.

2. Juran JM, Gryna FM, Bingham RS. Quality control hand book. 3rd ed. New York; McGraw-Hill; 1951.

3. Enright TP, Prince B. Offline quality control pa-rameter estimation and experimental design with the Taguchi method. AFS Transactions 1983; 91: 393–400.

4. Byrne DM, Taguchi S. The Taguchi approach to parameter design. Quality Progress 1987; 20(12): 19–26.

5. QIT-Fer et Titane Inc. Ductile iron: The essentials of gating and risering system design seminar lec-ture notes. Montreal, Quebec; 1987.

6. Johnston RE. Design of experiments: Taguchi in the foundry. Transactions of the American Foundrymen’s Society 1989; 97: 415–418.

7. Taguchi G. Taguchi on robust technology development: Bringing quality engineering upstream. New York: American Society of Mechanical En-gineers; 1993.

8. Lipinski M, Schaefer W, Andersen S. Modeling of combined heat and fluid flow for determination of filling sequence for real complex shaped castings. In: Modeling of casting, welding and advanced solidification processes. Warrendale, PA: Transcranial Magnetic Stimulation (TMS); 1991. p. 771–776.

9. Minaie B, Stelson KA, Voller VR. Analysis of flow patterns and solidification phenomena in the die casting process. Journal of Engineering Material and Technology 1991; 113: 296–302.

10. Papai J, Mobley C. Die thermal fields and heat fluxes during die casting of 380 aluminum alloy in H-13 steel dies. NADCA Transactions 1991: 377–384.

11. Sulaiman SB, Gethin DT. A network technique for metal flow analysis in the filling system of pressure diecasting and its experimental verification on a cold chamber machine. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 1992; 206(4): 261–275.

12. Blundell JK, Dhanju YS. An expert system for manufacturing process selection. AFS Transactions 1994; 102: 369–379.

13. Frayce D, Hétu JF, Loong C. Numerical modeling of filling and solidification in die casting. 17th International Die Casting Congress and Exposition; 1993 Oct 18-21; Cleveland, OH. North American Die Casting Association; 1993. p. 13–17.

14. Venkatesan K, Shivpuri R. Numerical simulation of die cavity filling and solidification in die castings and an evaluation of process parameters on die wear. 17th International Die Casting Congress and Exposition; 1993 Oct 18-21; Cleveland, Ohio. Transactions of the North American Die Casting Association; 1993.

15. Rao KP, Prasad Y. Neural network approach to flow stress evaluation in hot deformation. Journal of Materials Processing Technology 1995; 53(3-4): 552–566.

16. Barua PB, Kumar P, Gaindhar JL. Surface roughness optimization of v-process castings through Taguchi’s method (97-45). Transactions of the American Foundrymen’s Society 1997; 105: 763–768.

17. Hahn O, Fahrig HM, Wappelhorst M. Influence of the coating on the mould filling mechanisms in the lost foam casting of aluminium. Casting Plant and Technology International 1999; 15: 10–17.

18. Yang X, Jolly M, Campbell J. Reduction of surface turbulence during filling of sand castings using a vortex-flow runner. Modeling of casting, welding and advanced solidification processes (MCWASP IX). Aachen, Germany; 2000; 420–427.

19. Jolly MR, Lo HSH, Turan M, et al. Use of simulation tools in the practical development of a method for manufacture of cast iron camshafts. Conference on Modeling of Casting, Welding and Advanced Solidification Processes (MCWASP IX); 2000 Aug 20-25; Aachen, Germany. 2000. p. 311–318.

20. Antony J, Banuelas R. Key ingredients for the effective implementation of Six Sigma program. Measuring Business Excellence 2002; 6(4): 20–27.

21. Arita T, McCann P. The spatial and hierarchical organization of Japanese and US multinational semiconductor firms. Journal of International Management 2002; 8(1): 121–139.

22. Masters I, Khoei AR, Gethin DT. Design optimization of aluminium recycling processes using Taguchi technique. Journal of Materials Processing Technology 2002; 127(1): 96–106.

23. Shaji S, Radhakrishnan V. Analysis of process parameters in surface grinding with graphite as lubricant based on the Taguchi method. Journal of Materials Processing Technology 2003; 141(1): 51–59.

24. Sillen R. Shrinkages in iron castings, some facts. Ductile Iron News 2002; 1–3.

25. Syrcos GP. Die casting process optimization using Taguchi methods. Journal of Materials Processing Technology 2003; 135(1): 68–74.

26. Treichler D, Carmichael R, Kusmanoff A, et al. Design for Six Sigma: 15 lessons learned. Quality Progress 2002; 35(1): 33–42.

27. Alagarsamy A. Casting defect analysis procedure and a case history. PT Keith Millis Symposium on Ductile Iron Castings. 2003 Oct 20-23; Birmingham, Alabama. Citation Corporation; 2003.

28. Muzammil M, Singh PP, Talib F. Optimization of gear blank casting process by using Taguchi’s robust design technique. Quality Engineering 2003; 15(3): 351–359.

29. Ghani JA, Choudhury IA, Hassan HH. Application of Taguchi method in the optimization of end milling parameters. Journal of Materials Processing Technology 2004; 145(1): 84–92.

30. Vijayaram TR, Sulaiman S, Hamouda AMS, et al. Foundry quality control aspects and prospects to reduce scrap rework and rejection in metal casting manufacturing industries. Journal of Materials Processing Technology 2006; 178(1-3): 39–43.

31. Shen C, Wang L, Li Q. Optimization of injection molding process parameters using combination of artificial neural network and genetic algorithm method. Journal of Materials Processing Technology 2007; 183(2-3): 412–418.

32. Karunakar DB, Datta GL. Controlling green sand mould properties using artificial neural networks and genetic algorithms—A comparison. Applied Clay Science 2007; 37(1-2): 58–66.

33. Sarkar BN. Capability enhancement of a metal casting process in a small steel foundry through Six Sigma: A case study. International Journal of Six Sigma and Competitive Advantage 2007; 3(1): 56–71.

34. Parappagoudar MB, Pratihar DK, Datta GL. Forward and reverse mappings in green sand mould system using neural networks. Applied Soft Computing 2008; 8(1): 239–260.

35. Prabhushankar GV, Devadasan SR, Shalij PR, et al. The origin, history and definition of Six Sigma: A literature review. International Journal of Six Sigma and Competitive Advantage 2008; 4(2): 133–150.

36. Behera R, Kayal S, Sutradhar G. Solidification behavior and detection of Hotspots in Aluminium alloy castings: Computer aided analysis and experimental validation. international Journal of Applied Engineering Research 2010; 1(4): 715–726.

37. Denkena B, Schürmeyer JT, Kaddour R, et al. Assessing mould costs analysing manufacturing processes of cavities. The International Journal of Advanced Manufacturing Technology 2011; 56(9): 943–949.

38. Singh KK, Mishra RR. Minimising the casting defect using casting simulation–A case study of an industrial casting. Indian Foundry Journal 2011; 57(1): 49–54.

39. Kumar S, Satsangi PS, Prajapati DR. Optimization of green sand casting process parameters of a foundry by using Taguchi’s method. The Interna-tional Journal of Advanced Manufacturing Tech-nology 2011; 55(1): 23–34.

40. Kumar S, Prajapati DR, Satsangi PS. Design for Six Sigma to optimize the process parameters of a foundry. International Journal of Productivity and Quality Management 2011; 8(3): 333–35.

41. Franchetti M, Yanik M. Continuous improvement and value stream analysis through the lean DMAIC Six Sigma approach: a manufacturing case study from Ohio, USA. International Journal of Six Sigma and Competitive Advantage 2011; 6(4): 278–300.

42. Sambhe RU, Dalu RS. Six Sigma implementation in Indian medium scale automotive enterprises–A review and agenda for future research. International Journal of Six Sigma and Competitive Advantage 2011; 6(3): 224–242.

43. Singh BJ, Khanduja D. Ambience of Six Sigma in Indian foundries–An empirical investigation. International Journal of Six Sigma and Competitive Advantage 2012; 7(1): 12–40.

44. Desai DA. Quality and productivity improvement through Six Sigma in foundry industry. International Journal of Productivity and Quality Management 2012; 9(2): 258–280.

45. Kumar S, Satsangi PS, Prajapati DR. Optimization of process factors for controlling defects due to melt shop using Taguchi method. International Journal of Quality & Reliability Management 2013; 30(1): 4–22.

46. Kumar S, Satsangi PS, Prajapati DR. Improvement of Sigma level of a foundry: A case study. The TQM Journal 2013; 25(1): 29–43.

47. Gijo EV, Bhat S, Jnanesh NA. Application of Six Sigma methodology in a small scale foundry industry. International Journal of Lean Six Sigma 2014; 5(2): 193–211.

48. Misra RK, Chauhan A. Six Sigma approach for reducing rejection of in-house cast component. International Journal of Six Sigma and Competitive Advantage 2015; 9(2-4): 208–221.

49. Sachin S, Dileeplal J. Six sigma methodology for improving manufacturing process in a foundry industry. International Journal of Advanced Engineering Research and Science 2017; 4(5): 131–136.

50. Vendrame Takao MR, Woldt J, Da Silva IB. Six Sigma methodology advantages for small and medium sized enterprises: A case study in the plumbing industry in the United States. Advances in Mechanical Engineering 2017; 9(10): 1–10.

51. Sambhe RU. Operational guidelines for Six-Sigma implementation: Survey of Indian medium scale automotive industries. International Journal of Economics and Management Engineering 2016; 10(1): 182–187.