This paper is devoted to the determination of the dispersive component of the surface energy of two boron materials such as h-BN and BPO₄ surfaces by using the inverse gas chromatography (IGC) at infinite dilution. The specific interactions and Lewis’s acid-base parameters of these materials were calculated on the light of the new thermal model concerning the dependency of the surface area of organic molecules on the temperature, and by using also the classical methods of the inverse gas chromatography as well as the different molecular models such as Van der Waals, Redlich-Kwong, Kiselev, geometric, Gray, spherical, cylindrical and Hamieh models. It was proved that h-BN surface exhibits higher dispersive surface energy than BPO₄ material.

The specific properties of interaction of the two boron materials were determined. The results obtained by using the new thermal model taking into account the effect of the temperature on the surface area of molecules, proved that the classical IGC methods, gave inaccurate values of the specific parameters and Lewis’s acid base constants of the solid surfaces. The use of the thermal model allowed to conclude that h-BN surface has a Lewis basicity twice stronger than its acidity, whereas, BPO₄ surface presents an amphoteric character.

1. Conder JR, Young CL. Physical measurements by gas chromatography. Hoboken, New Jersey: Wiley; 1979.

2. Sawyer DT, Brookman DJ. Thermodynamically based gas chromatographic retention index for organic molecules using salt-modified aluminas and porous silica beads. Analytical Chemistry 1968; 40(12): 1847–1853. doi: 10.1021/ac60268a015.

3. Saint-Flour C, Papirer E. Gas-solid chromatography. A method of measuring surface free energy characteristics of short glass fibers. 1. Through adsorption isotherms. Industrial & Engineering Chemistry Product Research and Development 1982; 21(2): 337–341. doi: 10.1021/i300006a029.

4. Saint-Flour C, Papirer E. Gas-solid chromatography: method of measuring surface free energy characteristics of short fibers. 2. Through retention volumes measured near zero surface coverage. Industrial & Engineering Chemistry Product Research and Development 1982; 21(4): 666–669. doi: 10.1021/i300008a031.

5. Schultz J, Lavielle L, Martin C. The role of the interface in carbon fibre-epoxy composites. The Journal of Adhesion 1987; 23(1): 45–60. doi: 10.1080/00218468708080469.

6. Balard H, Sidqi M, Papirer E, et al. Study of modified silicas by inverse gas chromatography part II: Influence of chain length on surface properties of silicas grafted with α–ω diols. Chromatographia 1988; 25: 712–716. doi: 10.1007/BF02290477.

7. Sidqi M, Ligner G, Jagiello J, et al. Characterization of specific interaction capacity of solid surfaces by adsorption of alkanes and alkenes. Part I: Adsorption on open surfaces. Chromatographia 1989; 28: 588–592. doi: 10.1007/BF02260683.

8. Sidqi M, Balard H, Papirer E, et al. Study of modified silicas by inverse gas chromatography. Influence of chain length on the conformation of n-alcohols grafted on a pyrogenic silica. Chromatographia 1989; 27: 311–315. doi: 10.1007/BF02321275.

9. Balard H, Sidqi M, Papirer E, et al. Study of modified silicas by inverse gas chromatography. Part I: Influence of chain length on grafting ratio. Chromatographia 1988; 25: 707–711. doi: 10.1007/BF02290476.

10. Papirer E, Brendlé E, Balard H, Dentzer J. Variation of the surface properties of nickel oxide upon heat treatment evidenced by temperature programmed desorption and inverse gas chromatography studies. Journal of Materials Science 2000; 35: 3573–3577. doi: 10.1023/A:1004813629876.

11. Donnet JB, Ridaoui H, Balard H, et al. Evolution of the surface polar character of pyrogenic silicas, with their grafting ratios by dimethylchlorosilane, studied by microcalorimetry. Journal of Colloid and Interface Science 2008; 325(1): 101–106. doi: 10.1016/j.jcis.2008.05.025.

12. Przybyszewska M, Krzywania A, Zaborski M, Szynkowska MI. Surface properties of zinc oxide nanoparticles studied by inverse gas chromatography. Journal of Chromatography A 2009; 1216(27): 5284–5291. doi: 10.1016/j.chroma.2009.04.094.

13. Bakaoukas N, Sevastos D, Kapolos J, et al. Characterization of polymeric coatings in terms of their ability to protect marbles and clays against corrosion from sulfur dioxide by inverse gas chromatography. International Journal of Polymer Analysis and Characterization 2013; 18(6): 401–413. doi: 10.1080/1023666X.2013.785647.

14. Brendlé E, Papirer E. A new topological index for molecular probes used in inverse gas chromatography for the surface nanorugosity evaluation. Journal of Colloid and Interface Science 1997; 194(1): 207–216. doi: 10.1006/jcis.1997.5104.

15. Rückriem M, Inayat A, Enke D, et al. Inverse gas chromatography for determining the dispersive surface energy of porous silica. Colloids and Surfaces A: Physicochemical and Engineering Aspects 2010; 357(1–3): 21–26. doi: 10.1016/j.colsurfa.2009.12.001.

16. Boudriche L, Chamayou A, Calvet R, et al. Influence of different dry milling processes on the properties of an attapulgite clay, contribution of inverse gas chromatography. Powder Technology 2014; 254: 352–363. doi: 10.1016/j.powtec.2014.01.041.

17. Demertzis P, Riganakos K, Kontominas M. Water sorption isotherms of crystalline raffinose by inverse gas chromatography. International Journal of Food Science & Technology 1989; 24(6): 629–636. doi: 10.1111/j.1365-2621.1989.tb00689.x.

18. Helen H, Gilbert S. Moisture sorption of dry bakery products by inverse gas chromatography. Journal of Food Science 1985; 50(2): 454–458. doi: 10.1111/j.1365-2621.1985.tb13426.x.

19. Apte S. Excipient-API interactions in dry powder inhalers. Journal of Excipients and Food Chemicals 2012; 3(4): 129–142.

20. Apostolopoulos D, Gilbert SG. Water sorption of coffee solubles by frontal inverse gas chromatography: Thermodynamic considerations. Journal of Food Science 1990; 55(2): 475–487. doi: 10.1111/j.1365-2621.1990.tb06790.x.

21. Basivi PK, Pasupuleti VR, Seella R, et al. Inverse gas chromatography study on London dispersive surface free energy and electron acceptor-donor of fluconazole drug. Journal of Chemical & Engineering Data 2017; 62(7): 2090–2094. doi: 10.1021/acs.jced.7b00169.

22. Jones MD, Young P, Traini D. The use of inverse gas chromatography for the study of lactose and pharmaceutical materials used in dry powder inhalers. Advanced Drug Delivery Reviews 2012; 64(3): 285–293. doi: 10.1016/j.addr.2011.12.015.

23. Hamieh T, Rezzaki M, Schultz J. Study of the second order transitions and acid-base properties of polymers adsorbed on oxides by using inverse gas chromatography at infinite dilution: I. theory and methods. Journal of Colloid and Interface Science 2001; 233(2): 339–342. doi: 10.1006/jcis.2000.7267.

24. Hamieh T, Schultz J. New approach to characterise physicochemical properties of solid substrates by inverse gas chromatography at infinite dilution. I. Some new methods to determine the surface areas of some molecules adsorbed on solid surfaces. Journal of Chromatography A 2002; 969(1–2): 17–25. doi: 10.1016/S0021-9673(02)00368-0.

25. Hamieh T, Schultz J. New approach to characterise physicochemical properties of solid substrates by inverse gas chromatography at infinite dilution: II. Study of the transition temperatures of poly(methyl methacrylate) at various tacticities and of poly(methyl methacrylate) adsorbed on alumina and silica. Journal of Chromatography A 2002; 969(1–2): 27–36. doi: 10.1016/S0021-9673(02)00358-8.

26. Hamieh T. Fadlallah MB, Schultz J. New approach to characterise physicochemical properties of solid substrates by inverse gas chromatography at infinite dilution: III. Determination of the acid-base properties of some solid substrates (polymers, oxides and carbon fibres): A new model. Journal of Chromatography A 2002; 969(1–2): 37–47. doi: 10.1016/S0021-9673(02)00369-2.

27. Hamieh T, Schultz J. Inverse gas chromatography study of the influence of temperature on the surface area of adsorbed molecules (French). Journal de Chimie Physique 1996; 93: 1292–1331. doi: 10.1051/jcp/1996931292.

28. Hamieh T, Schultz J. Study of the adsorption of n-alkanes on polyethylene surface. State equations, molecule areas and fraction of surface covered. Comptes Rendus de l'Académie des Sciences, Série IIb 1996; 323(4): 281–289.

29. Hamieh T, Schultz J. A new method of calculation of polar molecule area adsorbed on MgO and ZnO by inverse gas chromatography. Comptes Rendus de l'Académie des Sciences, Série IIb 1996; 322(8): 627–633.

30. Hamieh T. Study of the temperature effect on the surface area of model organic molecules, the dispersive surface energy and the surface properties of solids by inverse gas chromatography. Journal of Chromatography A 2020; 1627: 461372. doi: 10.1016/j.chroma.2020.461372.

31. Hamieh T, Ahmad AA, Roques-Carmes T, Toufaily J. New approach to determine the surface and interface thermodynamic properties of H-β-zeolite/rhodium catalysts by inverse gas chromatography at infinite dilution. Scientific Reports 2020; 10(1): 1–27. doi: 10.1038/s41598-020-78071-1.

32. Hamieh T. New methodology to study the dispersive component of the surface energy and acid-base properties of silica particles by inverse gas chromatography at infinite dilution. Journal of Chromatographic Science 2022; 60(2): 126–142. doi: 10.1093/chromsci/bmab066.

33. Hamieh T. New physicochemical methodology for the determination of the surface thermodynamic properties of solid particles. AppliedChem 2023; 3(2): 229–255. doi: 10.3390/appliedchem3020015.

34. Chehimi MM, Abel ML, Perruchot C, et al. The determination of the surface energy of conducting polymers by inverse gas chromatography at infinite dilution. Synthetic Metals 1999; 104(1): 51–59. doi: 10.1016/S0379-6779(99)00040-5.

35. Peng Y, Gardner DJ, Han Y, et al. Influence of drying method on the surface energy of cellulose nanofibrils determined by inverse gas chromatography. Journal of Colloid and Interface Science 2013; 405: 85–95. doi: 10.1016/j.jcis.2013.05.033.

36. Puig C, Meijer H, Michels M, et al. Characterization of glass transition temperature and surface energy of bituminous binders by inverse gas chromatography. Energy & Fuels 2004; 18(1): 63–67. doi: 10.1021/ef030062l.

37. Mohammadi-Jam S, Burnett DJ, Waters KE. Surface energy of minerals-Applications to flotation. Minerals Engineering 2014; 66: 112–118. doi: 10.1016/j.mineng.2014.05.002.

38. Shui M, Reng Y, Pu B, Li J. Variation of surface characteristics of silica-coated calcium carbonate. Journal of Colloid and Interface Science 2004; 273(1): 205–210. doi: 10.1016/j.jcis.2004.01.018.

39. Bandosz TJ, Putyera K, Jagiełło J, Schwarz JA. Application of inverse gas chromatography to the study of the surface properties of modified layered minerals. Microporous Materials 1993; 1(1): 73–79. doi: 10.1016/0927-6513(93)80010-R.

40. Isik B, Ugraskan V, Cakar F, Yazici O. Investigation of the surface properties of hexagonal boron nitride and boron phosphate by inverse gas chromatography at infinite dilution. Journal of Chromatographic Science 2023; 61(1): 7–14. doi: 10.1093/chromsci/bmac017.

41. Dorris GM, Gray DG. Adsorption of n-alkanes at zero surface coverage on cellulose paper and wood fibers. Journal of Colloid and Interface Science 1980; 77(2): 353–362. doi: 10.1016/0021-9797(80)90304-5.

42. Fowkes FM. Interface acid-base/charge-transfer properties. In: Andrade JD (editor). Surface and interfacial aspects of biomedical polymers. New York: Springer New York; 1985. p. 337–372. doi: 10.1007/978-1-4684-8610-0_9.

43. Donnet JB, Park SJ, Balard H. Evaluation of specific interactions of solid surfaces by inverse gas chromatography. Chromatographia 1991; 31: 434–440. doi: 10.1007/BF02262385.

44. Chehimi MM, Pigois-Landureau E. Determination of acid–base properties of solid materials by inverse gas chromatography at infinite dilution. A novel empirical method based on the dispersive contribution to the heat of vaporization of probes. Journal of Materials Chemistry 1994; 4(5): 741–745. doi: 10.1039/JM9940400741.

45. Brendlé E, Papirer E. A new topological index for molecular probes used in inverse gas chromatography for the surface nanorugosity evaluation. Journal of Colloid and Interface Science 1997; 194(1): 207–216. doi: 10.1006/jcis.1997.5104.

46. Balard H, Brendlé E, Papirer E. Determination of the acid–base properties of solid surfaces using inverse gas chromatography: Advantages and limitations. In: Mittal KL (editor). Acid-base interactions, relevance to adhesion science and technology. Boca Raton: CRC Press; 2000. p. 299–316.

47. Gutmann V. The Donor-acceptor approach to molecular interactions. New York: Plenum Press; 1978.