Study on combustion characteristics of swirl premixed combustor

Zhihao Zhang, Xiao Liu, Tiezheng Zhao, Gang Liu, Guangpu Lv, Hongtao Zheng

Article ID: 1520
Vol 4, Issue 2, 2021

VIEWS - 334 (Abstract) 271 (pdf)

Abstract


Taking a certain type of combustion chamber as the research object, the numerical simulation is carried out by using RANS (Reynolds averaged Navier-stokes) and LES (large eddy simulation), and the simulation results of the two numerical methods are compared and analyzed. The research results show that the RANS calculation results can reflect the main flow field characteristics in the combustion field, and have certain engineering significance. LES can reproduce specific flow field details such as the weak axial flow region, accurately simulate the location and strength of the shear layer, simulate the dynamic development process of flame, and capture the dynamic characteristics of the combustion flow field. Compared with RANS, LES has more obvious advantages in numerical simulation of the combustion flow field. Through calculation, the precessing vortex core under this working condition is composed of three relatively independent spiral vortex branches, which excites periodic velocity pulsation and pressure pulsation in the combustion chamber. LES captures the dominant frequency with the precession vortex core of 156 Hz.

Keywords


Swirl Premixed Combustion Chamber; Partial Premixed Combustion; Large Eddy Simulation; Precessing Vortex Core

Full Text:

pdf


References


1. Luciano E, Ballester J. Analysis of the dynamic response of premixed flames through chemiluminescence cross-correlation maps. Combustion and Flame 2018; 194: 296–308.

2. Patel N, Menon S. Simulation of spray–turbulence–flame interactions in a lean direct injection combustor. Combustion and Flame 2008; 153(1–2): 228–257.

3. El-Asrag HA, Iannetti AC, Apte SV. Large eddy simulations for radiation-spray coupling for a lean direct injector combustor. Combustion and Flame 2014; 161(2): 510–524.

4. Wang X. Investigation on the turbulance characteristics in the near field of round jet flow with DNS and RANS LES [MSc thesis]. Hangzhou: Zhejiang University; 2010.

5. He W, Zheng H, Cai L. Analysis of turbulent combustion model on numerical simulation of combustion chamber. Journal of Thermal Science and Technology 2011; 10(4): 360–365.

6. Yang H, Zheng H. Structural design and numerical simulation of dual-fuel gas turbine nozzle. Journal of Thermal Science and Technology 2010; 9(3): 78–85.

7. Bulat G, Jones WP, Marquis AJ. NO and CO formation in an industrial gas-turbine combustion chamber using LES with the Eulerian sub-grid PDF method. Combustion and Flame 2014; 161(7): 1804–1825.

8. Han X, Laera D, Morgans AS, et al. Flame macrostructures and thermoacoustic instabilities in stratified swirling flames. Proceedings of the Combustion Institute 2019; 37(4): 5377–5384.

9. Fluent Inc. Fluent user’s guide.Canonsburg: PA: Ansys; 2017.

10. Bilger RW. Future progress in turbulent combustion research. Progress in Energy and Combustion Science 2000; 26(4–6): 367–380.

11. Stopper U, Meier W, Sadanandan R, et al. Experimental study of industrial gas turbine flames including quantification of pressure influence on flow field, fuel/air premixing and flame shape. Combustion and Flame 2013; 160(10): 2103–2118.

12. Syred N, Beer JM. Combustion in swirling flows: A review. Combustion and Flame 1974; 23(2): 143–201.




DOI: https://doi.org/10.24294/tse.v4i2.1520

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Zhihao Zhang, Xiao Liu, Tiezheng Zhao, Gang Liu, Guangpu Lv, Hongtao Zheng

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

This site is licensed under a Creative Commons Attribution 4.0 International License.