A simulation based optimization approach to combine two hedging control policies in a transported degrading failure-prone manufacturing system
Vol 6, Issue 1, 2023
VIEWS - 906 (Abstract) 456 (PDF)
Abstract
This paper deals with joint production and corrective maintenance problem of a transported material network failure-prone manufacturing system along which two aspects are supposed. First, each non-identical machine are subject to degradation with failure phenomena. When a failure occurs, system is either repaired or replaced with new one, repairing activity not only degrades machine operating state, but also increases with the next repair time. Second, optimality production control policy called Modified Hedging Point Policy (MHPP) and Modified Hedging Corridor Policy (MHCP) are applied for given network machine. The aim of this article is to find decision variables so as to minimize incurred cost function, including repair costs, stock related costs (i.e., holding costs, backlog and shortage) and setup cost, over an finite-horizon time. Simulation experimental approach with meta-heuristic algorithm is applied to obtain near-optimum decision variables.
Keywords
Full Text:
PDFReferences
1. Kimemia J, Gershwin SB. An algorithm for the computer control of a flexible manufacturing system. AIIE Transactions 1983; 15(4):353-362.
2. Kenné JP, Gharbi A. A simulation optimization approach in production planning of failure prone manufacturing systems. Journal of intelligent manufacturing 2001; 12(5):421-431.
3. Gharbi A, Kenné JP. Production and preventive maintenance rates control for a manufacturing system: an experimental design approach. International Journal of Production Economics 2000; 65(3):275-287.
4. Mifdal L, Hajej Z, Dellagi S. Joint optimization approach of maintenance and production planning for a multiple-product manufacturing system. Mathematical Problems in Engineering 2015.
5. Sajadi SM, Seyed Esfahani MM, Sörensen K. Production control in a failure-prone manufacturing network using discrete event simulation and automated response surface methodology. The International Journal of Advanced Manufacturing Technology 2011; 53(1):35-46
6. Elhafsi M, Bai SX. Optimal production and setup control of a dynamic two-product manufacturing system: Analytical solution. Mathematical and computer modelling 1996; 24(3):57-78
7. Gharbi A, Kenné JP, Hajji A. Operational level-based policies in production rate control of unreliable manufacturing systems with set-ups. International Journal of Production Research 2006; 44(3):545-567.
8. Gharbi A, Kenne JP. Optimal production control problem in stochastic multiple-product multiple-machine manufacturing systems. IIE transactions 2003; 35(10):941-952.
9. Kenné JP, Boukas E, Gharbi A. Control of production and corrective maintenance rates in a multiple-machine, multiple-product manufacturing system. Mathematical and computer modelling 2003; 38(3-4):351-365.
10. Gharbi A, Kenné JP, Beit M. Optimal safety stocks and preventive maintenance periods in unreliable manufacturing systems. International Journal of Production Economics 2007; 107(2):422-434.
11. Ebeling CE. An Introduction to Reliability and Maintenance Engineering. McGraw-Hill, Singapore, 1997.
12. Dehayem Nodem FI, Kenne JP, Gharbi A. Production planning and repair/replacement switching policy for deteriorating manufacturing systems. The International Journal of Advanced Manufacturing Technology 2001; 57 (5):827-840.
13. Pham H, Wang H. Imperfect maintenance. European journal of operational research 1996; 94(3):425-438
14. Berg M, Epstein B. A modified block replacement policy. Naval Research Logistics (NRL) 1976; 23(1):15-24.
15. Denkena B, Bluemel P, Kroening S, et al. Condition based maintenance planning of highly productive machine tools. Production Engineering 2012; 6(3):277-285.
16. Van Horenbeek A, Buré J, Cattrysse D, et al. Joint maintenance and inventory optimization systems: A review. International Journal of Production Economics 2013; 143(2):499-508.
17. Leung K. A note on ‘A bivariate optimal replacement policy for a repairable system’. Engineering Optimization 2006; 38(5):621-625.
18. Wu S. Doubly geometric processes and applications. Journal of the Operational Research Society 2017; 1-13.
19. Kushner H, Dupuis PG. Numerical methods for stochastic control problems in continuous time, Springer Science & Business Media 2013; 24.
20. Kleijnen JP, Wan J. Optimization of simulated systems: OptQuest and alternatives. Simulation Modelling Practice and Theory 2007; 15(3):354-362.
21. Kadry S, Bagdasaryan A, Kadhum M. Simulation and analysis of staff scheduling in hospitality management. In: Modeling, Simulation, and Applied Optimization (ICMSAO), 2017 7th International Conference on IEEE, 2017; pp.1-6.
22. Alvandi S, Li W, Kara S. An Integrated Simulation Optimisation Decision Support Tool for Multi-Product Production Systems. Modern Applied Science 2017; 11(6): 56.
23. Nodem FD, Kenné J, Gharbi A. Simultaneous control of production, repair/replacement and preventive maintenance of deteriorating manufacturing systems. International Journal of Production Economics 2011; 134 (1):271-282.
24. Ouaret S, Kenné JP, Gharbi A, et al. Age-dependent production and replacement strategies in failure-prone manufacturing systems. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2017; 231(3):540-554.
25. Assid M, Gharbi A, Hajji A. Joint production and setup control policies of unreliable manufacturing systems minimizing the incurred total cost and taking into account other criteria. Int J Adv Manuf Technol 2014; 72:809-826.
26. Montgomery DC. Design and analysis of experiments. John Wiley & Sons, 2017.
27. Shokohyar S, Mansour S. Simulation-based optimisation of a sustainable recovery network for Waste from Electrical and Electronic Equipment (WEEE). International Journal of Computer Integrated Manufacturing 2013; 26(6):487-503.
28. Ben-Salem A, Gharbi A, Hajji A. Environmental issue in an alternative production–maintenance control for unreliable manufacturing system subject to degradation. The International Journal of Advanced Manufacturing Technology 2015; 77(1-4):383-398.
DOI: https://doi.org/10.24294/tm.v1i3.832
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
This site is licensed under a Creative Commons Attribution 4.0 International License.