Calculation of elastic tensile behavior of CF/PA6 composite material disc
Vol 7, Issue 2, 2024
VIEWS - 228 (Abstract) 137 (PDF)
Abstract
In this paper, the characteristic behavior of the disc consisting of thermoplastic composite CF/PA6 material was considered. Analysis was made by taking into account the usage areas of the materials and referring to certain temperatures between 30 ℃ and 150 ℃. Composite materials are lightweight; they show high strength. For these reasons, they are preferred in technology, especially in the aircraft and aerospace industry. With this study, the radial and tangential stresses determined within a certain temperature The temperatures were determined and compared with previous studies in the literature. According to the results obtained, it is believed that the thermoplastic composite CF/PA6 disc design can be used in engineering.
Keywords
Full Text:
PDFReferences
1. Jiregna IT, Lemu HG. Thermal stress analysis of disc brake using analytical and numerical methods. IOP Conference Series: Materials Science and Engineering. 2021; 1201(1): 012033. doi: 10.1088/1757-899x/1201/1/012033
2. Khairnar HP, Phalle VM, Mantha SS. Comparative frictional analysis of automobile drum and disc brakes. Tribology in Industry. 2016; 38(1): 11-23.
3. Deressa KT, Ambie DA. Thermal Load Simulations in Railway Disc Brake: A Systematic Review of Modelling Temperature, Stress and Fatigue. Archives of Computational Methods in Engineering. 2021; 29(4): 2271-2283. doi: 10.1007/s11831-021-09662-y
4. Belhocine A, Abdullah OI. A thermomechanical model for the analysis of disc brake using the finite element method in frictional contact. Journal of Thermal Stresses. 2019; 43(3): 305-320. doi: 10.1080/01495739.2019.1683482
5. Kayiran HF. Numerical analysis of composite disks based on carbon/aramid—epoxy materials. Emerging Materials Research. 2022; 11(1): 155-159. doi: 10.1680/jemmr.21.00052
6. Kayiran HF. Rotating brake discs with carbon laminated composite and e-glass epoxy material: A mathematical modeling. Iranian Polymer Journal. 2022; 32: 457-468. doi: 10.1007/s13726-022-01138-5
7. Manthena VR, Srinivas VB, Kedar GD. Analytical solution of heat conduction of a multilayered annular disk and associated thermal deflection and thermal stresses. Journal of Thermal Stresses. 2020; 43(5): 563-578. doi: 10.1080/01495739.2020.1735975
8. Zhang Z, Zhou D, Fang H, et al. Analysis of layered rectangular plates under thermo-mechanical loads considering temperature-dependent material properties. Applied Mathematical Modelling. 2021; 92: 244-260. doi: 10.1016/j.apm.2020.10.036
9. Timeshenko S, Goodier, JN. Theory of Elasticity. McGraw-Hill; 1970. pp. 73-75.
10. Sen F, Akyüz BH. Analysis of thermal stresses in a metal matrix composite rotating disk under the influence of temperature. Dicle University, Faculty of Engineering. 2013; 4(1): 51-60.
11. Tahir MM, Wang WX, Matsubara T. A new design of end-tab for the tensile testing of unidirectional thermoplastic composites CF/PA6. In: Proceedings of the 21st International Conference on Composite Materials; 20-25 August 2017; Xi’an, China.
12. MCAM. Available online: https://www.mcam.com/mam/37307/GEPErtalon%C2%AE%20LFX%20PA6_en_US.pdf (accessed on 15 April 2024).
13. Matvienko O, Daneyko O, Valikhov V, et al. Elastoplastic Deformation of Rotating Disk Made of Aluminum Dispersion-Hardened Alloys. Metals. 2023; 13(6): 1028. doi: 10.3390/met13061028
14. Ekhteraei Toussi H, RezaeiFarimani M. Elasto-plastic deformation analysis of rotating disc beyond its limit speed. International Journal of Pressure Vessels and Piping. 2012; 89: 170-177. doi: 10.1016/j.ijpvp.2011.11.001
DOI: https://doi.org/10.24294/jpse.v7i2.6086
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Hüseyin Fırat Kayiran
License URL: https://creativecommons.org/licenses/by/4.0/
This site is licensed under a Creative Commons Attribution 4.0 International License.