Cobalt-based sulfides have emerged as promising candidates for next-generation high-performance anode materials for lithium-ion batteries (LIBs) due to their high theoretical specific capacity and reversible conversion reaction mechanisms. However, their practical application is hindered by volume expansion effects and relatively low rate performance. Guided by theoretical principles, this study synthesizes nanoscale Bi/CoS-C and Bi/Co₄S₃-C (denoted as Bi/CS-C) composite materials using Co and Bi₂S₃ as precursors via a solid-state ball milling method. The electrochemical properties of these materials were systematically investigated. When employed as anodes for LIBs, Bi/CoS-C and Bi/CS-C exhibit excellent rate capabilities. At current densities of 0.1, 0.5, 1, 4, and 10 A/g, the reversible capacities of Bi/CoS-C were 939.2, 730.7, 655.6, 508.1, and 319 mAh/g, respectively. In contrast, Bi/CS-C exhibited reversible capacities of 760.4, 637.6, 591.9, 484.3, and 295.4 mAh/g, respectively. Moreover, Co₄S₃, as an active component, enables superior long-cycle performance compared to CoS. After 300 cycles at 0.2 A/g, the Bi/CoS-C and Bi/CS-C electrodes retained capacities of 193.1 and 788.8 mAh/g, respectively. This study demonstrates that nanostructure design and carbon-based composite materials can effectively mitigate the volume expansion issue of cobalt-based sulfides, thereby enhancing their rate performance and cycling stability. This strategy provides new insights for the development of high-performance anode materials for lithium-ion batteries and is expected to accelerate their practical application in next-generation energy storage devices.

1.         Navia Simon D, Diaz Anadon L. Power price stability and the insurance value of renewable technologies. Nature Energy 2025. 10(3): 329–341. doi: 10.1038/s41560-025-01704-0

2.         Kan X, Reichenberg L, Hedenus F, Daniels D. Renewable export cost index as an indicator of global renewable energy trade potential. Communications Earth & Environment. 2025; 6(1): 112. doi: 10.1038/s43247-025-02094-7

3.         Costa CM, Pinto RS, Serra JP, et al. Next generation sustainable lithium-ion batteries: Micro and nanostructured materials and processes. Chemical Engineering Journal. 2025; 509: 161337. doi: 10.1016/j.cej.2025.161337

4.         Jeong H, Kim J, Lee S-H, et al. Iron-catalyzed graphitization of lignocellulose: A pathway to develop artificial graphite as anode materials for lithium-ion batteries applications. Journal of Alloys and Compounds. 2025; 1020: 179485. doi: 10.1016/j.jallcom.2025.179485

5.         Li X, Deng C, Liu M, et al. Reutilization and upcycling of spent graphite for sustainable lithium-ion batteries: Progress and perspectives. eScience. 2025; in press.

6.         Wang K, Hua W, Huang X, et al. Synergy of cations in high entropy oxide lithium ion battery anode. Nature Communications. 2023; 14 (1): 1487. doi: 10.1038/s41467-023-37034-6

7.         Ali S, Bakhtiar SUH, Ismail A, et al. Transition metal sulfides: From design strategies to environmental and energy-related applications. Coordination Chemistry Reviews. 2025; 523: 216237. doi: 10.1016/j.ccr.2024.216237

8.         Hu X, Ma P, Zhang Z, et al. Emerging transition metal sulfide/MXene composites for the application of electrochemical energy storage. Chemical Engineering Journal. 2024; 499: 156272. doi: 10.1016/j.cej.2024.156272

9.         Wang S, Qu C, Wen J, et al. Progress of transition metal sulfides used as lithium-ion battery anodes. Materials Chemistry Frontiers. 2023; 7(14): 2779–2808. doi: 10.1039/D2QM01200F

10.      Jiang S, Mao M, Pang M, et al. N-doped 3D reduced graphene oxide supported C-encapsulated Co₉S₈/Co₄S₃ composites as anode for improved lithium storage. Journal of Alloys and Compounds. 2023; 968: 172206. doi: 10.1016/j.jallcom.2023.172206

11.      Pantrangi M, Ashalley E, Hafiz W, et al. Core-shell transition metal disulfide grafted carbon matrix composite as an anode material for high-performance lithium-ion batteries. Journal of Energy Storage. 2025; 114: 115878. doi: 10.1016/j.est.2025.115878

12.      Zheng J, He C, Li X, et al. CoS₂–MnS@Carbon nanoparticles derived from metal–organic framework as a promising anode for lithium-ion batteries. Journal of Alloys and Compounds. 2021; 854: 157315. doi: 10.1016/j.jallcom.2020.157315

13.      Lin Y, Qiu Z, Li D, et al. NiS₂@CoS₂ nanocrystals encapsulated in N-doped carbon nanocubes for high performance lithium/sodium ion batteries. Energy Storage Materials 2018; 11: 67–74. doi: 10.1016/j.ensm.2017.06.001

14.      Li ZA, Wang SG, Chen PP, et al. Interface Engineering of MOF-Derived Co₃O₄@CNT and CoS₂@CNT Anodes with Long Cycle Life and High-Rate Properties in Lithium/Sodium-Ion Batteries. ACS Applied Materials & Interfaces. 2024; 16: 19730–19741. doi: 10.1021/acsami.3c19361

15.      Liu M, Wang L, Zeng X, et al. Hierarchical Ni₃S₂/CoS₂ Nanosheet Arrays on Ni Foam as Superior Anode Materials for Lithium-Ion Batteries. ACS Applied Nano Materials. 2025; 8(14). doi: 10.1021/acsanm.5c00388

16.      Lee HR, Kim YS, Lee SY, et al. Bifunctional effects of nitrogen-doped carbon quantum dots on CoS₂/mesoporous carbon composites for high-performance lithium-ion batteries. Applied Surface Science. 2024; 664: 160228. doi: 10.1016/j.apsusc.2024.160228

17.      Shi M, Wang Q, Hao J, et al. MOF-derived hollow Co₄S₃/C nanosheet arrays grown on carbon cloth as the anode for high-performance Li-ion batteries. Dalton Transactions. 2020; 49(40): 14115–14122. doi: 10.1039/D0DT03070H

18.      Zhou C, Ma X, Liu G, et al. Three-dimensional interwoven CoS₂/reduced graphene oxide/carbon nanotubes composite as anode materials for high-performance lithium-ion batteries. Journal of Alloys and Compounds. 2024; 972: 172800. doi: 10.1016/j.jallcom.2023.172800

19.      Wu J, Wang K, Hu J, et al. Multi-walled Bi₂O₃/Bi@C particles as a high-performance anode material for lithium-ion batteries. Journal of Energy Storage. 2024; 102: 114024. doi: 10.1016/j.est.2024.114024

20.      Liu X, Xie J, Tang Y, et al. Bi@C sandwiched carbon nanolayers enables remarkable cyclability at high current density for lithium-ion batteries. Applied Surface Science. 2023; 613: 155996. doi: 10.1016/j.apsusc.2022.155996

21.      Li C, Yang D, Jiang Z, et al. Novel crystalline Bi/amorphous Bi₂O₃ hybrid nanoparticles embedded in N-doped carbon for high-performance lithium-ion battery anodes. Journal of Physics and Chemistry of Solids. 2025; 196: 112330. doi: 10.1016/j.jpcs.2024.112330

22.      Yu M, Dong Z, Mu J, et al. Fabrication of permselective interlayer with uniform pore structure and in-situ sulfurized Co₄S₃ for high performance lithium sulfur battery. Separation and Purification Technology. 2024; 341: 126664. doi: 10.1016/j.seppur.2024.126664

23.      Jiang M, Hu Y, Mao B, et al. Strain-regulated Gibbs free energy enables reversible redox chemistry of chalcogenides for sodium ion batteries. Nature Communications. 2022; 13(1): 5588. doi: 10.1038/s41467-022-33329-2

24.      Hu Y, Li H, Gu H, et al. Al³⁺ pre-intercalation and g-C₃N₄ coating synergistically modulate gibbs free energy for robust and compatible MnO₂ cathodes in aqueous aluminum batteries. Chemical Engineering Journal. 2025; 507: 160532. doi: 10.1016/j.cej.2025.160532

25.      Chen X, Wang P, Zhang Z, Yin L. Bi₂S₃–CoS@C core-shell structure derived from ZIF-67 as anodes for high performance lithium-ion batteries. Journal of Alloys and Compounds. 2020; 844: 156008. doi: 10.1016/j.jallcom.2020.156008

26.      Wang H, Ma J, Liu S, et al. CoS/CNTs hybrid structure for improved performance lithium ion battery. Journal of Alloys and Compounds. 2016; 676: 551–556. doi: 1016/j.jallcom.2016.03.132

27.      Chen Y, Lu C, Yuan S, et al. N-doped carbon nanotubes and CoS@NC composites as a multifunctional separator modifier for advanced lithium-sulfur batteries. Journal of Colloid and Interface Science. 2025; 680: 405–417. doi: 10.1016/j.jcis.2024.11.108

28.      Cheng W, Di H, Shi Z, et al. Synthesis of ZnS/CoS/CoS₂@N-doped carbon nanoparticles derived from metal-organic frameworks via spray pyrolysis as anode for lithium-ion battery. Journal of Alloys and Compounds. 2020; 831: 154607. doi: 10.1016/j.jallcom.2020.154607

29.      Dong C, Guo L, Li H, et al. Rational fabrication of CoS₂/Co₄S₃@N-doped carbon microspheres as excellent cycling performance anode for half/full sodium ion batteries. Energy Storage Materials. 2020; 25: 679-686. doi: 10.1016/j.ensm.2019.09.019.

30.      Cao Y, Zhou X, Gao F. Reconfiguration of metal-organic frameworks to form ultrafine Bi dots as an excellent high-current performance of lithium-ion battery anode. Journal of Alloys and Compounds. 2024; 992: 174650. doi: 10.1016/j.jallcom.2024.174650.

31.      Fu H, Shi C, Nie J, et al. Bi₂O₃ nanospheres coated in electrospun carbon spheres derived Bi@C used as anode materials for lithium-ion batteries. Journal of Alloys and Compounds. 2022; 918: 165666. doi: 10.1016/j.jallcom.2022.165666

32.      Wang Z, Qi J, Han L, et al. CoS₂ nanoparticles embedded in N-doped hollow carbon nanotubes as anode materials for high performance lithium-ion battery. Materials Letters. 2024; 364: 136332. doi: 10.1016/j.matlet.2024.136332

33.      Li Y, Bao Y, Han B, et al. 3D-structured Co₉S₈@NSG prepared using deep eutectic solvents as high-performance anode material of lithium-ion batteries. FlatChem. 2024; 45: 100635. doi: 10.1016/j.flatc.2024.100635

34.      Gao J, Wang X, Huang Y, et al. Hollow core-shell structured CNT/PAN@Co₉S₈@C coaxial nanocables as high-performance anode material for lithium ion batteries. Journal of Alloys and Compounds. 2021; 853: 157354. doi: 10.1016/j.jallcom.2020.157354

35.      Chen Q, Hu J, Xia Q, Zhang L. Complexation-assisted polymerization for the synthesis of functional silicon oxycarbonitride with well-dispersed ultrafine CoS as high-performance anode for lithium-ion batteries. Journal of Alloys and Compounds. 2023; 949: 169824. doi: 10.1016/j.jallcom.2023.169824