Simulation study of pressure swing adsorption to purify helium using zeolite 13X
Vol 3, Issue 1, 2020
VIEWS - 858 (Abstract) 836 (PDF)
Abstract
A two-bed pressure swing adsorption system on a commercial type of zeolite 13X adsorbent has been studied numerically over a wide range of operating conditions to helium separation from gaseous mixture. The model includes energy, mass and momentum balances. The coupled partial differential equations are solved using fully implicit forth order Rung-Kutta scheme in the simulation. The effects of adsorption step pressure, adsorption step time and feed flow rate on the helium purity and recovery were investigated. Results shown that as the adsorption step pressure increases the helium purity will be increased. In addition, the helium recovery increases, and the helium purity decreases when the feed flow rate increases. Finally, the simulation results indicated a very good agreement with some current literature experimental work.
Keywords
Full Text:
PDFReferences
1. Das NKr, Chaudhuri H, Bhandari RK, et al. Purification of helium from natural gas by pressure swing adsorption. Current Science 2008; 95(12): 1684–1687.
2. Bhushan J. Helium purification by gas adsorption method master of technology [MSc thesis]. Rourkela: National Institute of Technology; 2011.
3. Stoll AP, Taylor LG, Steel AJ. Helium purifiers. Proceedings of the seventh international cryogenic engineering conference (ICEC7); 1978. p. 642–647.
4. Van Cleve E, Taborek P, Rutledge JE. Helium adsorption on lithium substrates. Journal of Low Temperature Physics 2008; 150:1–11.
5. Martins D, Catarino I, Lopes D, et al. Low temperature adsorption versus pore size in activated carbons. International Cryocooler Conference, Inc., Boulder, CO. 2011.
6. Majidia R, Ghanbarzadeh S, Jodaee asl N. Molecular dynamics simulation of helium adsorption on carbon nanocones with disclination angles of 240° and 300°. The 4th international conference on nanostructures (ICNS4); 2012.
7. Das NKr, Kumar P, Mallik C, et al. Development of a helium purification system using pressure swing adsorption. Current Science 2012; 103(6): 631–634.
8. Chang Hua, Wu Z, Yao M, et al. Experimental investigation and modeling of adsorption of carbon dioxide on 5A molecular sieve for helium purification of high-temperature gas-cooled reactor. Energy Procedia 2013; 39(9): 208–226.
9. Bartolomei M, Carmona-Novillo E, Hernández MI, et al. Graphdiyne pores: “Ad Hoc” openings for helium separation applications The Journal of Physical Chemistry 2014; 118(51): 29966–29972.
10. Ruthven DM. Principle of adsorption and adsorption processes. New York: John Wiley & Sons, Inc. 1984.
11. Mendes AMM, Costa AVC, Rodrigues AE. Analysis of nonisobaric steps in nonlinear bicomponent pressure swing adsorption systems. Application to Air Separation Industrial & Engineering Chemistry Research 2000; 39(1): 138–145.
12. Mendes AMM, Costa AVC, Rodrigues AE. Oxygen separation from Air by PSA: modeling and experimental results part I: Isothermal operation. Separation and Purification Technology 2001; 24(1): 173–188.
13. Milton RM (inventors). UNION CARBIDE CORP (assignee). Molecular sieve adsorbents. U.S. patent. 2,882,244. 1959 Apr.
14. Yang RT. Adsorbents: Fundamentals and applications. New Jersey: John Wiley & Sons, Inc.; 2003.
15. Ritter JA, Liu Y. Tapered pressure swing adsorption columns for simultaneous air purification and sol-vent vapor recovery. Industrial & Engineering Chemistry Research 1998; 37(7): 2783–2791.
16. Rege SU, Yang R, Qian K, et al. Air-prepurifcation by pressure swing adsorption using single/layered beds. Chemical Engineering Science 2001; 56(8): 2745–2759.
17. Mivechian A, Pakizeh M. Hydrogen recovery from Tehran refinery off-gas using pressure swing adsorption, gas absorption and membrane separation technologies: Simulation and economic evaluation. Korean Journal of Chemical Engineering 2013; 30(4): 937–948.
18. Jang SC, Yang S, Oh SG, et al. Adsorption dynamics and effects of carbon to zeolite ratio of layered beds for multi component gas adsorption. Korean Journal of Chemical Engineering 2011; 28(2): 583–590.
19. Kim YH, Lee DG, Moon DK, et al. Effect of bed void volume on pressure vacuum swing adsorption for air separation. Korean Journal of Chemical Engineering 2014; 31(1): 132–141.
20. Ruthven DM, Farooq S, Knaebel KS. Pressure swing adsorption. New York: VCH Publications Inc.; 1994.
21. Teague KG, Edgar TF. Predictive dynamic model of a small pressure swing adsorption. Industrial & Engineering Chemistry Research 1999; 38(10): 3761–3775.
22. Zaman M, Lee JH. Carbon capture from stationary power generation sources: A review of the current status of the technologies. Korean Journal of Chemical Engineering 2013; 30(8): 1497–1526.
23. Hoshyargar V, Fadaei F, Ashrafizadeh SN. Mass transfer simulation of nanofiltration membranes for electrolyte solutions through generalized Max-well-Stefan approach. Korean Journal of Chemical Engineering 2015; 32: 1388–1404.
24. Grande CA. Advances in pressure swing adsorption for gas separation. International Scholarly Research Notices Chemical Engineering 2012; 1–13.
25. Jee JG, Lee JS, Lee CH. Air separation by small-scale two-bed medical O2 pressure swing adsorption. Industrial & Engineering Chemistry Re-search 2001; 40(16): 3647–3658.
26. Chou CT, Chen L. Simulation of a four-bed pressure swing adsorption process for oxygen enrichment. Industrial & Engineering Chemistry Research 1994; 33(5): 1250–1258.
27. Jee JG, Park HJ, Haam SJ, et al. Effects of nonisobaric steps and isobaric steps on O2 pressure swing adsorption for an aerator. Industrial & Engineering Chemistry Research 2002; 41(17): 4383–4392.
28. Jee JG, Lee SJ, Lee CH. Comparison of the adsorption dynamics of air on Zeolite 5A and carbon molecular sieve beds. Korean Journal of Chemical Engineering 2004; 21(6): 1183–192.
29. Jee JG, Park MK, Yoo HK, et al. Adsorption and desorption characteristics of air on zeolite 5a, 10x, and 13x fixed beds. Separation Science and Technology 2002; 37(15): 3465–3490.
30. Lee SJ, Jung JH, Moon JH, et al. Parametric study of the three-bed pressure-vacuum swing adsorption process for high purity O2 generation from ambient air. Industrial & Engineering Chemistry Research 2007; 46(11): 3720–3728.
31. Lin L. Numerical simulation of pressure swing adsorption process [MSc thesis]. Xi’an, China: Xidian University; 1990.
32. Wilson SJ, Beh CCK, Webley PA, et al. The effects of a readily adsorbed trace component (water) in a bulk separation PSA process: The case of oxygen VSA. Industrial & Engineering Chemistry Research 2001; 40(12): 2702–2713.
DOI: https://doi.org/10.24294/ace.v3i1.568
Refbacks
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.