Catalytic effect of ferric sulfate and zinc sulfate on lignin pyrolysis

Alberto Albis Arrieta, Ever Ortiz Muñoz, Ismael Piñeres Ariza, Juan Osorio Cardozo, Jennifer Monsalvo Morales

Article ID: 1449
Vol 5, Issue 1, 2022

VIEWS - 381 (Abstract) 171 (PDF)

Abstract


The effect of zinc sulfate and ferric sulfate on the pyrolysis process of lignin was studied at three different heating rates by using the thermogravimetric analysis technique. It was found that the pyrolysis of pure lignin is barely affected with the change of heating rates between 10 to 100 °C/min, which is unexpected because of the kinetic nature of pyrolysis. The pyrolysis kinetics of this major component of biomass was studied by using three fitting methods: the differential method with reaction order model n, the isoconversional method, and the distribution of activation energies model, DAEM. The best fit, which allowed calculating acceptable kinetic parameters, was obtained using the last method. The results show the influence of the catalysts and the heating rate on the lignin pyrolysis processes in the presence of the sulfates under study, which is confirmed by obtaining different kinetic parameters. The results suggest that zinc sulfate and ferric sulfate change the kinetic mechanism of lignin pyrolysis.

Full Text:

PDF


References


1. Rodríguez RP, Sierens R, Verhelst S, et al. Evaluation of the performance of internal combustion engines working with biodiesel (in Spanish). Mechanical Engineering 2008; 3: 33–38.

2. Perdices MB. Biomass as an energy resource. In: Castellanos PR (editors). Climate change, a challenge within our reach? (in Spanish) University of Salamanca Editions. Salamanca. 2009. p. 167–180.

3. Montiel JLR. Sugarcane biomass is an alternative to increase energy efficiency and reduce environmental pollution (in Spanish). Sugar Center 2003; 30(2): 14–21.

4. Camps Michelena M, Marcos Martín F. Biofuels (in Spanish). Madrid Editions Mundi Press; 2008. p. 20–40.

5. Soto NA, Machado WR, López DL. Determination of kinetic parameters in the pyrolysis of cypress pine (in Spanish). Quim. Nova 2010; 33(7): 1500–1505.

6. Abril A, Navarro EA. Ethanol from lignocellulosic biomass (in Spanish). Valencia: Aleta Editions; 2012. p. 11–41.

7. Caballero JA. Kinetic study of lignin pyrolysis: Design of a reactor for the study of secondary reactions (in Spanish). Doctor in Chemical Engineering. University of Alicante; 1995.

8. Gani A, Naruse I. Effect of cellulose and lignin content on pyrolysis and combustion characteristics for several types of biomass. Renewable Energy 2007; 32(4): 649–661.

9. Yang H, Yan R, Chen H, et al. Characteristics of hemicellulose, cellulose and lignin pyrolysis. Fuel 2007; 86(12): 1781–1788.

10. Lv D, Xu M, Liu X, et al. Effect of cellulose, lignin, alkali and alkaline earth metallic species on biomass pyrolysis and gasification. Fuel Processing Technology 2010; 91(8): 903–909.

11. Khelfa A, Bensakhria A, Weber J. Investigations into the pyrolytic behaviour of birch wood and its main components: primary degradation mechanisms, additivity and metallic salt effects. Journal of Analytical and Applied Pyrolysis 2013; 101: 111–121.

12. Hurley MJ, Gottuk DT, Hall Jr JR, et al. SFPE handbook of fire protection engineering. Springer 2015.

13. Çepelioğullar Ö, Haykırı-Açma H, Yaman S. Kinetic modelling of RDF pyrolysis: Model-fitting and model-free approaches. Waste Management 2016; 48: 275–284.

14. Martín-Lara M, Blázquez G, Zamora M, et al. Kinetic modelling of torrefaction of olive tree pruning. Applied Thermal Engineering 2017; 113: 1410–1418.

15. Açıkalın K. Pyrolytic characteristics and kinetics of pistachio shell by thermogravimetric analysis. Journal of Thermal Analysis and Calorimetry 2011; 109(1): 227–235.

16. Albis A, Ortiz E, Suárez A, et al. TG/MS study of the thermal devolatization of Copoazú peels (Theobroma grandiflorum). Journal of Thermal Analysis and Calorimetry 2013; 1–9.

17. Chen N, Ren J, Ye Z, et al. Kinetics of coffee industrial residue pyrolysis using distributed activation energy model and components separation of bio-oil by sequencing temperature—Raising pyrolysis. Bioresource Technology 2016; 221, 534–540.

18. Cheng Z, Wu W, Ji P, et al. Applicability of Fraser-Suzuki function in kinetic analysis of DAEM processes and lignocellulosic biomass pyrolysis processes. Journal of Thermal Analysis and Calorimetry 2015; 119(2): 1429–1438.

19. Várhegyi G. Aims and methods in non-isothermal reaction kinetics. Journal of Analytical and Applied Pyrolysis 2007; 79(1): 278–288.

20. Várhegyi G, Szabó P, Antal MJ. Kinetics of charcoal devolatilization. Energy & Fuels 2002; 16(3): 724–731.

21. Janković B. The pyrolysis process of wood biomass samples under isothermal experimental conditions—Energy density considerations: Application of the distributed apparent activation energy model with a mixture of distribution functions. Cellulose 2014; 21(4): 2285–2314.

22. Donskoi E, McElwain D. Optimization of coal pyrolysis modeling. Combustion and Flame 2000; 122(3): 359–367.

23. Abdelouahed L, Leveneur S, Vernieres-Hassimi L, et al. Comparative investigation for the determination of kinetic parameters for biomass pyrolysis by thermogravimetric analysis. Journal of Thermal Analysis and Calorimetry 2017; 129(2): 1201–1213.

24. Yu J, Paterson N, Blamey J, et al. Cellulose, xylan and lignin interactions during pyrolysis of lignocellulosic biomass. Fuel 2017; 191: 140–149.

25. Collard FX, Blin J. A review on pyrolysis of biomass constituents: Mechanisms and composition of the products obtained from the conversion of cellulose, hemicelluloses and lignin. Renewable and Sustainable Energy Reviews 2014; 38: 594–608.

26. Gottipati R, Mishra S. A kinetic study on pyrolysis and combustion characteristics of oil cakes: Effect of cellulose and lignin content. Journal of Fuel Chemistry and Technology 2011; 39(4): 265–270.

27. Ma Z, Sun Q, Ye J, et al. Study on the thermal degradation behaviors and kinetics of alkali lignin for production of phenolic—Rich bio-oil using TGA-FTIR and Py-GC/MS. Journal of Analytical and Applied Pyrolysis 2016; 117: 116–124.

28. Caprariis BD, Santarelli ML, Scarsella M, et al. Kinetic analysis of biomass pyrolysis using a double distributed activation energy model. Journal of Thermal Analysis and Calorimetry 2015; 121(3): 1403–1410.

29. Cai J, Wu W, Liu R. An overview of distributed activation energy model and its application in the pyrolysis of lignocellulosic biomass. Renewable and Sustainable Energy Reviews 2014; 36: 236–246.

30. Chayaporn S, Sungsuk P, Sunphorka S, et al. Evaluation of biomass component effect on kinetic values for biomass pyrolysis using simplex lattice design. Korean Journal of Chemical Engineering 2015; 32(6): 1081–1093.

31. Qu T, Guo W, Shen L, et al. Experimental study of biomass pyrolysis based on three major components: Hemicellulose, cellulose, and lignin. Industrial & Engineering Chemistry Research 2011; 50(18): 10424–10433.

32. Murugan P, Mahinpey N, Johnson KE, et al. Kinetics of the pyrolysis of lignin using thermogravimetric and differential scanning calorimetry methods. Energy & Fuels 2008; 22(4): 2720–2724.

33. Ferdous D, Dalai A, Bej S, et al. Pyrolysis of lignins: Experimental and kinetics studies. Energy & Fuels 2002; 16(6): 1405–1412.




DOI: https://doi.org/10.24294/ace.v5i1.1449

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.